Reference: 2379.02.3356

DOMINO

Trimmer / cable adjuster barrel thread Ø8mm / sheath tip for Ø8mm to bike and other (free brake nut)

Competition piece machined in the mass Ø8mm threading for sheath tip Ø8mm.

Price €11.03
Home in 2 to 5 days
More
Home in 2 to 5 days

Reference: 01486_72

DELLORTO

Main jet for DELLORTO small pitch carburettor, 5mm thread, 8mm length, genuine (INC certified)

Certified DELLORTO INC! Choose real DELLORTO quality!

Price €3.33
At your place in 2 to 5 days
More
At your place in 2 to 5 days

Reference: 320765

CGN

CGN self-tightening clamps (choice of diameter) for gasoline / vacuum / lung / oil hose ...

Ideal in case of breakage, loss or simply wear and tear on your necklace.

Price €0.83
At home in 2 to 5 days
More
At home in 2 to 5 days

Reference: 06 3140

MALOSSI

Head gasket Ø45.5 to 46mm 70cc MALOSSI 0.45mm thickness for Peugeot 103 / fox & wallaroo

Perfect for settling your squish.

Price €2.49
At home in 2 to 5 days
More
At home in 2 to 5 days

Reference: 6561

CGN

Standard sheath Ø5mm TRANSFIL (Ø2.5mm inside) for brake cable, accelerator, clutch ... Choice of color

A good quality sheath that will allow you to match it to your machine.

Price €1.66
At home in 2 to 5 days
More
At home in 2 to 5 days
All best sellers
  • Banner

Cylinder - piston without cylinder head 65cc Ø43,5mm AIRSAL aluminum for engine MORINI M1, M101, M1ES 50, M1K
  • Cylinder - piston without cylinder head 65cc Ø43,5mm AIRSAL aluminum for engine MORINI M1, M101, M1ES 50, M1K

Cylinder - piston without cylinder head 65cc Ø43,5mm AIRSAL aluminum for engine MORINI M1, M101, M1ES 50, M1K

020306435

Very good little aluminum kit for MORINI M1 engine, M101, M1ES, M1K ... 50 2T!

Engine preparation
€83.33
Quantity
At home in 2 to 5 days

Description

Piston cylinder kit made of aluminum treated nicasil AIRSAL big diameter 43,5mm. Offers an increase in engine capacity at around 60cc.

 

Photo du cylindre - piston sans culasse 65cc Ø43,5mm AIRSAL aluminium pour moteur MORINI M1, M101, M1ES 50, M1K

 

Diagrams reviewed on the rise, allows a nice increase in performance and torque at the same time as a refurbishment!

 

Photo du kit cylindre piston

 

Mounts on amchines equipped with engine MORINI M1, M101, M1ES50 and M1K. Made in Spain, good quality for a low price!

 

Photo du kit cylindre - piston sans culasse 65cc Ø43,5mm AIRSAL aluminium pour moteur MORINI M1, M101, M1ES 50, M1K

 

To accompany a carburettor adjustment or a carburetor from 15 to 17,5mm, and if possible of a sports exhaust!

 

Photo du kit 65cc Ø43,5mm AIRSAL aluminium pour moteur MORINI M1, M101, M1ES 50, M1K

 

Optionally we offer a stage 1 preparation, this preparation is a modification of the channels and exhaust light by increasing the diagrams and improving the pipe, it increases the performance of the cylinder. An improvement of the piston and skirt stocking is also included in this modification. Allow a little extra time for this preparation!

 

Mounts on :

 

BIMOTOR: Contry 50
CALELLA: Colcar 50
GHIARONI: New Deal 50
LEM: Malibu Luc 50
MALAGUTI: New Dribbling
WORLD: S150
MORINI: M1, M101, M1ES 50, M1K
MOTOESA: Mini 50
PUCH: Maxi Espana
SACOM: Cathy 50, CR1-S 50
SIS: Morini 50
SUZUKI: Maxi
TESTI: 10 50

Product Details
020306435
50 Items
New product

Data sheet

Diameter (Ø):
43.5mm
Intake diagram (lateral transfers):
105°
Displacement:
57.96cc on original 39mm stroke
Nombre de segment
Two 1.5mm thick
Exhaust Diagram:
150°
Model:
Morini M1K, M101, M1, PUCH MAXI intake on housing, ...
Matière
Aluminium
You might also like

Reference: 060306435

AIRSAL

Piston AIRSAL Ø43,5mm bi-segment for kit 65cc AIRSAL out of aluminum on MORINI M1, M101, M1ES 50, M1K

Spare piston for kits 65cc AIRSAL Ø43,5mm aluminum engine MORINI M1, M101, M1ES 50, M1K.

Price €24.99
At home in 10 to 15 days
More
At home in 10 to 15 days

Reference: 110306435

AIRSAL

Set of two AIRSAL Ø43.5mm segments for AIRSAL AIRSAL aluminum kit on MORINI M1, M101, M1ES 50, M1K

Set of two AIRSAL segments to maintain your 65cc on MORINI M1, M101, M1ES 50, M1K!

Price €5.83
At your place in 10 to 15 days
More
At your place in 10 to 15 days
16 other products in the same category:

Reference: 074000/1

ATHENA

Kit 70cc Ø45mm ATHENA RACING aluminum for SACHS BATAVUS, CITY, OPTIMA, TORROT, RIXE, M1, M2, M3 ...

Very good 70cc kit for SACHS integrated cylinder head! Available with or without intake pipe.

Price €191.66
Attention requires a delay of more than 20 days
More
Attention requires a delay of more than 20 days

Reference: 85206.00

PARMAKIT

Cylinder - Cylinder without piston 70cc Ø45mm PARMAKIT for ZUNDAPP SUPERTERM, CS50, KS50 ...

The piston-cylinder without cylinder head 70cc for ZUNDAPP air cooling as the CS50, KS50 ...

Price €158.03
Home in 2 to 10 days
More
Home in 2 to 10 days

Reference: 073600

ATHENA

Kit 80cc Ø48mm ATHENA RACING inclined admission aluminum for SACHS BATAVUS, CITY, OPTIMA, TORROT, RIXE, M1, M2, M3 ...

80cc kit with inclined admission, more practical for certain carburetion assemblies!

Price €191.66
At home in 2 to 10 days
More
At home in 2 to 10 days

Reference: 64425.00

PARMAKIT

Cylinder - Cylinder without piston 70cc Ø45mm aluminum PARMAKIT axis 12mm for RS 503 504 SACHS long race

A high-performance high-end special engine for SACHS 503 and 504 in axis of 12mm with 2 transfers with a long stroke crankshaft.

Price €179.40
Home in 2 to 10 days
More
Home in 2 to 10 days

Reference: 010500/1

ATHENA

§ Kit 60cc Ø42mm ATHENA RACING aluminum for minarelli P4, P6 ...

A whole 100% complete, in ATHENA 60cc 42mm diameter. Rare coins, very few are still on sale. MINARELLI P4, P4R, P6, TESTI, MOTRON ... Out of production!

More
In stock

Reference: 85211.00.pr.st.1

PARMAKIT

Cylinder - piston without cylinder head 70cc Ø45mm PARMAKIT for ZUNDAPP SUPERTERM LAMELLARE CS50, KS50 ... (large air valves)

The high engine without cylinder head, 70cc, for ZUNDAPP air cooling, big model with flaps!

Price €350.43
At home in 2 to 10 days
More
At home in 2 to 10 days

Reference: 85438.00

PARMAKIT

70cc kit for Ø45mm PARMAKIT ZUNDAPP Miniterm CS50, KS50 ...

A 70cc kit for ZUNDAPP air cooling for miniterm engines.

Price €268.80
Home in 2 to 10 days
More
Home in 2 to 10 days

Reference: 42307.00

PARMAKIT

Kit 70cc Ø44mm PARMAKIT aluminum 12mm axle for KREIDLER RS SUPER 50

A high-performance and full high special range for motor KREIDLER RS 50 SUPER.

Price €324.70
At home in 2 to 10 days
More
At home in 2 to 10 days

Reference: 85465.00

PARMAKIT

Cylinder - piston without cylinder head 70cc Ø45mm PARMAKIT for ZUNDAPP 50cc

kit Ø45mm 70cc for ZUNDAP 50 air cooling, admission without valves on cylinder.

Price €255.56
At home in 2 to 10 days
More
At home in 2 to 10 days

Reference: 85120.00

PARMAKIT

Cylinder - piston without cylinder head 70cc Ø45mm PARMAKIT for ZUNDAPP SUPER 50 LC liquid cooling

The only kit available on the market for ZUNDAPP liquid cooling SUPER 50 LC, KS50LC ...!

Price €290.59
Available from July 2021
More
Available from July 2021

Reference: 85220.00

PARMAKIT

Kit 70cc Ø45mm PARMAKIT for ZUNDAPP SUPERTERM LAMELLARE CS50, KS50 ... (large air valves)

The high engine complete with cylinder head, 70cc, for ZUNDAPP air cooling, big model flaps!

Price €384.53
At home in 2 to 10 days
More
At home in 2 to 10 days

Reference: 003800/1

ATHENA

Cylinder - piston without cylinder head 80cc Ø48mm ATHENA aluminum MORINI G30, S5, KTM, MALAGUTI FIFTY FULL CX 50, GAC

Very high quality 80cc kit, complete with valves and pipe for period MORINI engines!

More
In stock

Reference: 063600

ATHENA

Cylinder - piston without cylinder head 70cc Ø45mm ATHENA aluminum for ZUNDAPP 4M, 5M, FALCONET 604, PORTOGALLO, GRECIA ...

ZUNDAPP is very robust and powerful!

Price €160.83
2 to 10 days
More
2 to 10 days

Reference: 007100

ATHENA

Cylinder - piston without cylinder head 70cc Ø45mm ATHENA aluminum for ZUNDAPP FAMMEL, STANDARD, MINI TERM ... 50

ZUNDAPP is very robust and powerful!

Price €160.83
2 to 10 days
More
2 to 10 days

Reference: 25104.00

PARMAKIT

Cylinder - piston without cylinder head 80cc Ø48mm PARMAKIT aluminum axis 12mm for FANTIC CABALLERO

PARMAKIT 80cc special kit for old FANTIC CABALLERO. 48X48mm studs.

Price €311.97
At home in 2 to 10 days
More
At home in 2 to 10 days

Reference: 64430.00

PARMAKIT

Kit 70cc Ø45mm aluminum PARMAKIT axis 12mm for RS 503 504 SACHS long race

A high-performance and full high special range for motor SACHS 503 and 504 in axis of 12mm with 2 transfers with a long stroke crankshaft.

Price €264.87
Home in 2 to 10 days
More
Home in 2 to 10 days

Follow us on Facebook