Reference: 2379.02.3356

DOMINO

Trimmer / cable adjuster barrel thread Ø8mm / sheath tip for Ø8mm to bike and other (free brake nut)

Competition piece machined in the mass Ø8mm threading for sheath tip Ø8mm.

Price €11.03
Home in 2 to 5 days
More
Home in 2 to 5 days

Reference: 01486_72

DELLORTO

Main jet for DELLORTO small pitch carburettor, 5mm thread, 8mm length, genuine (INC certified)

Certified DELLORTO INC! Choose real DELLORTO quality!

Price €3.33
At your place in 2 to 5 days
More
At your place in 2 to 5 days

Reference: 320765

CGN

CGN self-tightening clamps (choice of diameter) for gasoline / vacuum / lung / oil hose ...

Ideal in case of breakage, loss or simply wear and tear on your necklace.

Price €0.83
At home in 2 to 5 days
More
At home in 2 to 5 days

Reference: 06 3140

MALOSSI

Head gasket Ø45.5 to 46mm 70cc MALOSSI 0.45mm thickness for Peugeot 103 / fox & wallaroo

Perfect for settling your squish.

Price €2.49
At home in 2 to 5 days
More
At home in 2 to 5 days

Reference: 6561

CGN

Standard sheath Ø5mm TRANSFIL (Ø2.5mm inside) for brake cable, accelerator, clutch ... Choice of color

A good quality sheath that will allow you to match it to your machine.

Price €1.66
At home in 2 to 5 days
More
At home in 2 to 5 days
All best sellers
  • Banner

Pipe of admission for PEUGEOT 103
Pipe of admission for PEUGEOT 103

Pipe of admission for PEUGEOT 103

Whether you need an intake pipe original type or enhanced for performance and big carburetors, you will find here, for your Peugeot 103, almost all the intake pipes of the market yet available! Reminder: For carburettors SHA, you need an external Ø19mm intake pipe for fixing the carburetor, and inner diameter of 15 to 16mm. For Rigid PHBG carburetors, you need an external Ø24mm intake pipe for fixing the carburetor, and inner diameter of 15 to 16mm. For flexible PHBG carburetors like, PHBN ... You need an intake pipe if possible adapted to flexible mounting but it is not mandatory, different sleeves exist! You may well mount a flexible 15mm PHBG on a pipe normally reserved for carburettors SHA external and internal diameter 19mm 15mm, you need just a sleeve surrounding the 19mm side intake pipe. Council never polish the inside of a pipe of admission, this favors rebounds of gases, namely a loss of performance and less simple property settings of the engine, prefer peening or sandblasting inside the intake pipe. Nothing prevents you before blasting / peening to make a nice finish with an abrasive roll DREMEL. Remember that for best performance, the internal diameter of the intake pipe must be identical to the outlet diameter of the carburetor, accompany your intake pipe has adapted valves and seals well.

There are 28 products.

Showing 1-21 of 28 item(s)

Active filters

Reference: 1400

CGN

CGN intake pipe with seal and screw Ø19mm by 24mm (PHBG) Peugeot 103 sp, mv, mvl, lm ...

An amazing pipe with a very good finish that will agree very well with a carburetor 18 to 21mm.

Price €5.83
At home in 2 to 5 days
More
At home in 2 to 5 days

Reference: 20 6635

MALOSSI

Inlet kit pipe + valves / slats MALOSSI VL1 Ø12 / 15mm Peugeot 103 sp, mvl, lm, ...

Ideal for gaining performance on your PEUGEOT 103 SP, MVL ...!

More
In stock

Reference: 215.0330

POLINI

Inlet pipe for POLINI casings without support incorporated on Peugeot 103 (Ø 15 or 19mm with the choices)

Price €8.33
At home in 2 to 5 days
More
At home in 2 to 5 days

Reference: 215.0308

POLINI

Intake manifold for POLINI check valves Ø15 or 19mm (PHBG or SHA) to the Peugeot 103 choices

The replacement pipe for valves boxes POLINI on PEUGEOT 103 SP, MV, LM ...

Price €15.83
At home in 2 to 5 days
More
At home in 2 to 5 days

Reference: 02 6238B

MALOSSI

Intake pipe for MALOSSI Ø20.8 by 24mm housings (PHBG) for all 103

A pipe specially designed for MALOSSI housings. It is very short with good diffusion, micro-blasted and with horizontal bars to avoid any gas rebounds. Clearly a very well worked pipe which will be accompanied by a VL6 valve box or other AM6 valve and a 21mm carburetor.

Price €21.66
At home in 2 to 5 days
More
At home in 2 to 5 days

Reference: 215.0370

POLINI

Intake pipe for POLINI housings incorporated support on Peugeot 103 (Ø 15 or 19mm with the choices)

Intake pipe for POLINI support housings incorporated on PEUGEOT 103.

Price €9.99
At home in 2 to 5 days
More
At home in 2 to 5 days

Reference: 56207.05

PARMAKIT

Intake pipe PARMAKIT Ø19mm by 24mm (PHBG) Peugeot 103 sp, mv, MVL, lm ...

Ideal with a carburettor PHBG 19 to 24mm and achieve maximum performance!

More
In stock

Reference: 56251.05

PARMAKIT

Intake pipe PARMAKIT Ø19mm by 24mm (PHBG) Peugeot 103 spx / rcx / clip / mvx finned

Ideal with a carburettor PHBG 19 to 24mm and achieve maximum performance! Model "finned" for mob Peugeot 103 SPX, RCX ...

Price €25.56
Home in 2 to 10 days
More
Home in 2 to 10 days

Reference: 496075

TEKNIX

Pipe of admission CGN Ø12mm by 19mm (SHA) Peugeot 103 sp, mv, MVL, lm, vogue ...

Ideal in case of breakage or wear your old room.

Price €9.16
Home in 2 to 5 days
More
Home in 2 to 5 days

Reference: 1399

TEKNIX

Pipe of admission CGN Ø15mm by 19mm (SHA) Peugeot 103 sp, mv, mvl, lm ...

Ideal in case of breakage or wear of your old part.

Price €5.83
At home in 2 to 5 days
More
At home in 2 to 5 days

Reference: 365641

DOPPLER

Pipe of admission DOPPLER ER2 Ø20mm (PHBG) flexible with sleeve for Peugeot 103

A shorter pipe for better venturi effect. This pipe is the highest end of the market. It will be perfect with a carburetor 19 to 21mm.

Price €19.99
Home in 2 to 5 days
More
Home in 2 to 5 days

Reference: 1403

DOPPLER

Pipe of admission DOPPLER Ø20mm by 24mm (PHBG) Peugeot 103 SPX, RCX, CLIP, MVX

A pipe which will be perfect accompanied by a carburettor PHBG 19 to 21mm. This pipe is blasted with a good finish to avoid the rebound of gases.

More
In stock

Reference: 0217524B

MALOSSI

Pipe of admission MALOSSI Ø15mm by 19mm (SHA) Peugeot 103 sp, mv, mvl, lm ...

An intake pipe adapted for a carburettor of 15mm or 16mm SHA on PEUGEOT 103!

More
In stock

Reference: 2017588

MALOSSI

Pipe of admission MALOSSI Ø15mm by 19mm (SHA) Peugeot 103 special vogue

Special pipe for peugeot 103 vogue, ideal in combination of a carburetor of 15mm SHA and a valve sport!

Price €37.49
Attention requires a delay of more than 20 days
More
Attention requires a delay of more than 20 days

Reference: 02 6487B

MALOSSI

Pipe of admission MALOSSI Ø15mm by 19mm (SHA) Peugeot 103 SPX, CLIP, RCX, MVX ...

The best to accompany a 15 or 16mm SHA carburetor on your 103!

Price €21.66
At home in 2 to 5 days
More
At home in 2 to 5 days

Reference: 02 2083B

MALOSSI

Pipe of admission MALOSSI Ø19mm by 24mm (PHBG) Peugeot 103 sp, mv, mvl, lm ... finned

The top of the intake pipe to put your PHBG 17.5mm to 21mm on your 103.

Price €14.99
At home in 5 to 10 days
More
At home in 5 to 10 days

Reference: 02 6489B

MALOSSI

Pipe of admission MALOSSI Ø20mm by 23mm (PHBG) flexible label Peugeot 103 spx, rcx, clip, mvx, vogue

A pipe specially designed for flexible assemblies. This pipe was specially created for the competition. It is therefore mounted with a flexible PHBG carburetor from 15 to 21mm.

Price €33.33
At home in 2 to 5 days
More
At home in 2 to 5 days

Reference: 02 6488B

MALOSSI

Pipe of admission MALOSSI Ø20mm by 24mm (PHBG) Peugeot 103 spx / rcx / clip / mvx

A pipe that mounts very well with a PHBG from 17.5 to 21mm. This pipe is corrected and revised for better distribution.

Price €19.16
At home in 2 to 5 days
More
At home in 2 to 5 days

Reference: 140520

TNT Original

Pipe of admission TNT Ø15mm by 19mm (SHA) Peugeot 103 spx / rcx / clip / mvx

An intake pipe with a good finish that will allow you to mount your Ø14 carburetor to 16mm while gaining power gain.

Price €7.68
At home in 2 to 5 days
More
At home in 2 to 5 days

Reference: 928.270.006

POLINI

POLINI flexible orientable intake pipe, at 70 ° for PWK on THOR engine or adaptation (PEUGEOT 103, MBK 51 ...)

POLINI pipe for THOR engine or adaptation on PEUGEOT 103 / MBK 51 requiring an elbow admission!

Price €62.49
At home in 5 to 12 days
More
At home in 5 to 12 days

Reference: 144.270.001

POLINI

POLINI flexible pipe 21mm for POLINI PANTERA, MINICROSS, XP5, XP3, XP1, X5, X3, X1 ... 103, 51

Flexible polini pipe 21mm for mini-moto and cross 2T POLINI, or mounting on POLINI crankcases with PEUGEOT 103 and MBK 51 supports!

Price €29.16
At home in 2 to 5 days
More
At home in 2 to 5 days

Follow us on Facebook