Pipe of admission CGN Ø12mm by 19mm (SHA) Peugeot 103 sp, mv, MVL, lm, vogue ...

Reference: 02 6487B

Pipe of admission MALOSSI Ø15mm by 19mm (SHA) Peugeot 103 SPX, CLIP, RCX, MVX ...

The best to accompany a 15 or 16mm SHA carburetor on your 103!

Reference: PIPE-POL-28-D

C-knit pipe. 24mm flexible BOUCHET at 28mm PWK / VHST for PEUGEOT 103 and MBK 51 with crankcases POLINI

Pipe POLINI flexible 24-28mm for mopeds with crankcases POLINI!

Reference: 02 2083B

Pipe of admission MALOSSI Ø19mm by 24mm (PHBG) Peugeot 103 sp, mv, mvl, lm ... finned

The top of the intake pipe to put your PHBG 17.5mm to 21mm on your 103.

Reference: 516867

Inlet pipe DOPPLER OPEN 3D Ø20mm (PHBG) flexible with sleeve for Peugeot 103

A shorter pipe for a better venturi effect. It will be perfect with a 19 to 21mm carburettor.

Reference: PIPE-MAL-21

Intake pipe C. BOUCHET 90° Ø19 to 21mm interax DERBI, PEUGEOT 103, MBK 51, crankcases MALOSSI, EUROCILINDRO

3D printed EPC pipe for housings MALOSSI on 103, EUROCILINDRO on MBK 51...

Reference: 1402

TEKNIX intake pipe Ø15mm by 19mm (SHA) Peugeot 103 spx / rcx / clip / mvx

An intake pipe with a good finish that will allow you to mount your carburetor Ø14 to 16mm while gaining power.

Reference: PIPE-POL-21-DC

Straight pipe C. BOUCHET flexible 19 to 21mm for PEUGEOT 103 and MBK 51 with crankcases POLINI

Pipe POLINI flexible 21mm for mopeds with crankcases POLINI!

Reference: 215.0370

Intake pipe for POLINI housings incorporated support on Peugeot 103 (Ø 15 or 19mm with the choices)

Intake pipe for POLINI support housings incorporated on PEUGEOT 103.

Reference: 02 6238B

Intake pipe for MALOSSI Ø20.8 by 24mm housings (PHBG) for all 103

A pipe specially designed for MALOSSI housings. It is very short with good diffusion, micro-blasted and with horizontal bars to avoid any gas rebounds. Clearly a very well worked pipe which will be accompanied by a VL6 valve box or other AM6 valve and a 21mm carburetor.

Reference: 215.0330

Inlet pipe for POLINI casings without support incorporated on Peugeot 103 (Ø 15 or 19mm with the choices)

Reference: 02 5038B

Straight pipe Ø15 or 19mm for MALOSSI valve box on MBK 51 / Peugeot 103

The best to repair or modify the size of your MALOSSI valve boxes on your PEUGEOT 103 or MBK 51.

Reference: pack_pipe_malossi_AM6_DERBI_90°

Flexible adjustable MALOSSI intake pipe, at 90° Ø28 to 32mm center distance AM6 / DERBI ( PEUGEOT 103, MBK 51...)

MALOSSI pipe for adaptation on PEUGEOT 103 / MBK 51 requiring an angled admission! Center distance am6 / DERBI

Reference: 02 6488B

Pipe of admission MALOSSI Ø20mm by 24mm (PHBG) Peugeot 103 spx / rcx / clip / mvx

A pipe that mounts very well with a PHBG from 17.5 to 21mm. This pipe is corrected and revised for better distribution.

Reference: 496075

Pipe of admission CGN Ø12mm by 19mm (SHA) Peugeot 103 sp, mv, MVL, lm, vogue ...

Ideal in case of breakage or wear your old room.

Reference: PIPE-MAL-28

Inlet pipe C. BOUCHET 90° Ø28 to 32mm interax DERBI, PEUGEOT 103, MBK 51, crankcases MALOSSI, EUROCILINDRO

3D printed EPC pipe for housings MALOSSI on 103, EUROCILINDRO on MBK 51...

Reference: 1314916B

Replacement intake pipe sleeve for MALOSSI admission kit on VESPA PX, T5 80, 125, 150 2T

Ø32mm spare sleeve angled at 90 ° internal for MALOSSI admission kit on VESPA 80, 125, 200 ...