CGN intake pipe with seal and screw Ø19mm by 24mm (PHBG) Peugeot 103 sp, mv, mvl, lm ...

Reference: 1400

CGN intake pipe with seal and screw Ø19mm by 24mm (PHBG) Peugeot 103 sp, mv, mvl, lm ...

An amazing pipe with a very good finish that will agree very well with a carburetor 18 to 21mm.

Reference: PIPE-POL-28-D

C-knit pipe. 24mm flexible BOUCHET at 28mm PWK / VHST for PEUGEOT 103 and MBK 51 with crankcases POLINI

Pipe POLINI flexible 24-28mm for mopeds with crankcases POLINI!

Reference: 516867

Inlet pipe DOPPLER OPEN 3D Ø20mm (PHBG) flexible with sleeve for Peugeot 103

A shorter pipe for a better venturi effect. It will be perfect with a 19 to 21mm carburettor.

Reference: PIPE-POL-21-D

C. BOUCHET flexible pipe 19 to 21mm for PEUGEOT 103 and MBK 51 with crankcases POLINI

Pipe POLINI flexible 21mm for mopeds with crankcases POLINI!

Reference: 215.0227

POLINI intake pipe Ø20mm by 24mm (PHBG) Peugeot 103 SPX, RCX, CLIP, MVX

High quality intake pipe for mounting PHBG carburetors from 17.5 to 21mm.

Reference: 365641

Pipe of admission DOPPLER ER2 Ø20mm (PHBG) flexible with sleeve for Peugeot 103

A shorter pipe for better venturi effect. This pipe is the highest end of the market. It will be perfect with a carburetor 19 to 21mm.

Reference: 02 2083B

Pipe of admission MALOSSI Ø19mm by 24mm (PHBG) Peugeot 103 sp, mv, mvl, lm ... finned

The top of the intake pipe to put your PHBG 17.5mm to 21mm on your 103.

Reference: 215.0330

Inlet pipe for POLINI casings without support incorporated on Peugeot 103 (Ø 15 or 19mm with the choices)

Reference: PIPE-MAL-21

Intake pipe C. BOUCHET 90° Ø19 to 21mm interax DERBI, PEUGEOT 103, MBK 51, crankcases MALOSSI, EUROCILINDRO

3D printed EPC pipe for housings MALOSSI on 103, EUROCILINDRO on MBK 51...

Reference: 02 1690B

Pipe of admission MALOSSI Ø15mm by 19mm (SHA) Peugeot 103 sp, mv, mvl, lm ...

An intake pipe adapted for a carburettor of 15mm or 16mm SHA on PEUGEOT 103!

Reference: 1314916B

Replacement intake pipe sleeve for MALOSSI admission kit on VESPA PX, T5 80, 125, 150 2T

Ø32mm spare sleeve angled at 90 ° internal for MALOSSI admission kit on VESPA 80, 125, 200 ...

Reference: CAL02RRD

RRD PERFORMANCES check valve adapter for POLINI housings with brackets on PEUGEOT 103

RRD PERFORMANCES wedge for re-orientation and adaptation of MINARELLI AM6 / DERBI valves / pipe on PEUGEOT 103 engine with POLINI housings, with built-in brackets.

Reference: 496075

Pipe of admission CGN Ø12mm by 19mm (SHA) Peugeot 103 sp, mv, MVL, lm, vogue ...

Ideal in case of breakage or wear your old room.

Reference: pack_pipe_malossi_AM6_DERBI_90°

Flexible adjustable MALOSSI intake pipe, at 90° Ø28 to 32mm center distance AM6 / DERBI ( PEUGEOT 103, MBK 51...)

MALOSSI pipe for adaptation on PEUGEOT 103 / MBK 51 requiring an angled admission! Center distance am6 / DERBI

Reference: 02 6238B

Intake pipe for MALOSSI Ø20.8 by 24mm housings (PHBG) for all 103

A pipe specially designed for MALOSSI housings. It is very short with good diffusion, micro-blasted and with horizontal bars to avoid any gas rebounds. Clearly a very well worked pipe which will be accompanied by a VL6 valve box or other AM6 valve and a 21mm carburetor.

Reference: 1399

Pipe of admission CGN Ø15mm by 19mm (SHA) Peugeot 103 sp, mv, mvl, lm ...

Ideal in case of breakage or wear of your old part.