Banner
The top of the intake pipe to put your PHBG 17.5mm to 21mm on your 103.
Here is the best intake pipe on the market for Peugeot 103 SP, MV, MVL, LM, VOGUE, CHRONO…. This pipe is finned (has a side cooling fin), this does not bring any real gain in cooling but brings an unusual look. It is very well worked for a good venturi effect. The external diameter is 24mm, so you can fit either a PHBG rigid carburetor, or a
flexible sleeve in order to subsequently install a flexible carburetor. Do not hesitate to look at our special rigid pipe sleeves. We recommend accompanying this intake pipe with a 19mm or 21mm carburetor. This pipe also has a space on the side to drill / tap and put a recovery lung.
Reference: 928.270.006
POLINI pipe for THOR engine or adaptation on PEUGEOT 103 / MBK 51 requiring an elbow admission!
Reference: 2017588
Special pipe for peugeot 103 vogue, ideal in combination of a carburetor of 15mm SHA and a valve sport!
Reference: 1400
An amazing pipe with a very good finish that will agree very well with a carburetor 18 to 21mm.
Reference: 02 6238B
A pipe specially designed for MALOSSI housings. It is very short with good diffusion, micro-blasted and with horizontal bars to avoid any gas rebounds. Clearly a very well worked pipe which will be accompanied by a VL6 valve box or other AM6 valve and a 21mm carburetor.
Reference: 02 6487B
The best to accompany a 15 or 16mm SHA carburetor on your 103!
Reference: pack_pipe_malossi_AM6_DERBI_90°
MALOSSI pipe for adaptation on PEUGEOT 103 / MBK 51 requiring an angled admission! Center distance am6 / DERBI
Reference: 20 6138
Ideal to put a carburetor DELLORTO 21 PHBG on your PEUGEOT XP using a system of real valves!
Reference: 1403
A pipe which will be perfect accompanied by a carburettor PHBG 19 to 21mm. This pipe is blasted with a good finish to avoid the rebound of gases.
Reference: 02 6488B
A pipe that mounts very well with a PHBG from 17.5 to 21mm. This pipe is corrected and revised for better distribution.
Reference: 516867
A shorter pipe for a better venturi effect. It will be perfect with a 19 to 21mm carburettor.
Reference: 02 1690B
An intake pipe adapted for a carburettor of 15mm or 16mm SHA on PEUGEOT 103!
Reference: CAL02RRD
RRD PERFORMANCES wedge for re-orientation and adaptation of MINARELLI AM6 / DERBI valves / pipe on PEUGEOT 103 engine with POLINI housings, with built-in brackets.
Reference: 1399
Ideal in case of breakage or wear of your old part.
Reference: 215.0226
Intake pipe ideal for fitting SHA 15 or 16mm carburettors.
Reference: 215.0225
Very good POLINI intake pipe for fitting 17.5 to 21mm PHBG carburettors.
The top of the intake pipe to put your PHBG 17.5mm to 21mm on your 103.
