Reference: 2379.02.3356

DOMINO

Trimmer / cable adjuster barrel thread Ø8mm / sheath tip for Ø8mm to bike and other (free brake nut)

Competition piece machined in the mass Ø8mm threading for sheath tip Ø8mm.

Price €11.03
Home in 2 to 5 days
More
Home in 2 to 5 days

Reference: 01486_72

DELLORTO

Main jet for DELLORTO small pitch carburettor, 5mm thread, 8mm length, genuine (INC certified)

Certified DELLORTO INC! Choose real DELLORTO quality!

Price €3.33
At your place in 2 to 5 days
More
At your place in 2 to 5 days

Reference: 320765

CGN

CGN self-tightening clamps (choice of diameter) for gasoline / vacuum / lung / oil hose ...

Ideal in case of breakage, loss or simply wear and tear on your necklace.

Price €0.83
At home in 2 to 5 days
More
At home in 2 to 5 days

Reference: 06 3140

MALOSSI

Head gasket Ø45.5 to 46mm 70cc MALOSSI 0.45mm thickness for Peugeot 103 / fox & wallaroo

Perfect for settling your squish.

Price €2.49
At home in 2 to 5 days
More
At home in 2 to 5 days

Reference: 6561

CGN

Standard sheath Ø5mm TRANSFIL (Ø2.5mm inside) for brake cable, accelerator, clutch ... Choice of color

A good quality sheath that will allow you to match it to your machine.

Price €1.66
At home in 2 to 5 days
More
At home in 2 to 5 days
All best sellers
  • Banner

Crankshaft, connecting rod assembly race origin 39,00mm for MINARELLI AM6
Crankshaft, connecting rod assembly race origin 39,00mm for MINARELLI AM6

Crankshaft, connecting rod assembly race origin 39,00mm for MINARELLI AM6

Here you will find the race crankshafts origin (39,00mm) for your 50cc or more motorcycles, minarelli am6. You will find so many original type crankshaft has very low prices, but also competition crankshaft with solid masses to increase the pre-compression by filling the dead volumes of the housing of the crankshaft reinforced racing connecting rods, high-end steels ... vilo of dynamically balanced and designed specifically for very high speeds! Remember, an original racing crankshaft is approved for the road, regardless of its design as it does not change the motor movement or the engine! Engine MINARELLI AM6 the original race of 39,00mm, the rod of 85mm and silks (carried bearings) Ø17mm.

There are 34 products.

Showing 1-21 of 34 item(s)

Active filters

Reference: 419

ARTEK

ARTEK K1 crankshaft 39mm stroke (Ø20mm bristles) for mécaboite minarelli am6

A very good quality mid-range crankshaft designed to go up to 14,000 rpm!

Price €85.46
At home within 2 to 5 days
More
At home within 2 to 5 days

Reference: 264006

DOPPLER

Crankshaft + bearing DOPPLER ER1 race 39mm (Ø17mm bristles) for mécaboite minarelli am6

The DOPPLER ER1 is the best value for money on the market, this model is reinforced and well balanced.

Price €91.66
At home in 2 to 5 days
More
At home in 2 to 5 days

Reference: IM07062

TOP PERFORMANCES

Crankshaft + bearings and spy TOP PERFORMANCES race 39mm (Ø17mm bristles) for mécaboite minarelli am6

An original crankshaft with bearings and spy perfectly adapted to be assembled together, reinforced model which will easily support an original type configuration up to the small 70cc kit.

Price €124.17
At home in 2 to 5 days
More
At home in 2 to 5 days

Reference: 075414

ATHENA

Crankshaft + bearings ATHENA Hyper Racing race 39mm (Ø20mm bristles) for mécaboite minarelli am6

A very high quality crankshaft, in large bristles, full masses delivered with its bearings for am6 engine!

Price €149.99
At home in 2 to 10 days
More
At home in 2 to 10 days

Reference: 9921720

TOP PERFORMANCES RACING (TPR)

Crankshaft + bearings TOP PERFORMANCES TPR race 39mm (bristles of Ø17mm + Ø20mm) for mécaboite driving minarelli am6

A vilo of quality to guarantee a solid and powerful engine!

Price €163.31
At home in 2 to 5 days
More
At home in 2 to 5 days

Reference: CB.44.91R

ITALKIT

Crankshaft + celeron bearings ITALKIT COMPETITION FACTORY race 39mm (Ø20mm bristles) for mécaboite minarelli am6

The ULTIMATE vilo for am6, gorsses worn 20mm, celerons bearings, forged rod machined mass, excellent balancing, .... The best of the best !!!

Price €199.99
At home in 2 to 5 days
More
At home in 2 to 5 days

Reference: CB.44.91

ITALKIT

Crankshaft bearings + Celerons ITALKIT COMPETITION race 39mm (silks of Ø20mm) for mécaboite minarelli am6

A crankshaft of high quality with a casting rod, delivered with its bearings celeron big litter !!!

Price €134.16
Home in 2 to 5 days
More
Home in 2 to 5 days

Reference: 31134950

AIRSAL

Crankshaft, connecting rod assembly AIRSAL Xtrem race 39mm (silks of Ø17mm) for mécaboite minarelli am6

A good reinforced crankshaft that mounts to virtually any configuration for an unbeatable price.

Price €174.99
Caution requires a delay of more than 20 days
More
Caution requires a delay of more than 20 days

Reference: 19880

ARTEK

Crankshaft, connecting rod assembly ARTEK K-series 39mm stroke (Ø17mm + Ø20mm silks) for mécaboite minarelli am6 engine

A reinforced crankshaft at a low price but very well balanced. Ideal for small 70cc or 50cc kit.

Price €58.11
At your place within 2 to 5 days
More
At your place within 2 to 5 days

Reference: 150838

ARTEK

Crankshaft, connecting rod assembly ARTEK K2 EVO race 39mm for mécaboite driving MINARELLI AM6

The most performance crankshaft from ARTEK which can go up to 20,000 revolutions!

Price €102.56
At home within 2 to 5 days
More
At home within 2 to 5 days

Reference: S410130320001

ATHENA

Crankshaft, connecting rod assembly ATHENA Racing race 39mm (bristles of Ø17mm) for mécaboite driving minarelli am6

A good crankshaft reinforced and in full masses for your minarelli am6 with bearings of origin size.

Price €124.99
At home in 2 to 10 days
More
At home in 2 to 10 days

Reference: CIG-130R

BRK Competition Systems By BARIKIT

Crankshaft, connecting rod assembly BARIKIT BRK 4 RACE race 39mm (Ø17mm bristles) for mécaboite minarelli am6

A reinforced crankshaft for a solid low engine, ideal to accompany a prepared configuration!

Price €145.83
At home in 2 to 10 days
More
At home in 2 to 10 days

Reference: CIG-133R

BRK Competition Systems By BARIKIT

Crankshaft, connecting rod assembly BARIKIT BRK 4 RACE stroke 40.7mm (Ø17mm bristles) for mécaboite minarelli am6

A reinforced crankshaft for a low solid engine, ideal to accompany a prepared configuration! Stroke slightly increased to 40.7mm!

Price €145.83
At home in 2 to 10 days
More
At home in 2 to 10 days

Reference: CIG-78R

BRK Competition Systems By BARIKIT

Crankshaft, connecting rod assembly BARIKIT BRK Racing race 39mm (silks of Ø17mm) for mécaboite minarelli am6

A reinforced crankshaft for a low engine sound, ideal to accompany a prepared configuration!

Price €166.66
Home in 2 to 10 days
More
Home in 2 to 10 days

Reference: CIG-29

BARIKIT

Crankshaft, connecting rod assembly BARIKIT COMPETITION race 39mm (bristles of Ø17mm) for mécaboite driving minarelli am6

A reinforced version in solid masses for minarelli am6 with normal size bearings!

Price €116.66
At home in 2 to 10 days
More
At home in 2 to 10 days

Reference: CIG-42

BARIKIT

Crankshaft, connecting rod assembly BARIKIT COMPETITION race 39mm (silks of Ø20mm) for mécaboite minarelli am6

A reinforced version, full masses for minarelli am6 with bearings Ø20mm big litter.

Price €120.83
Home in 2 to 10 days
More
Home in 2 to 10 days

Reference: CIG-22

BARIKIT

Crankshaft, connecting rod assembly BARIKIT Sport race 39mm (silks of Ø17mm) for mécaboite minarelli am6

A reinforced crankshaft sport for minarelli am6!

Price €83.33
Home in 2 to 10 days
More
Home in 2 to 10 days

Reference: 12100044

BIDALOT

Crankshaft, connecting rod assembly BIDALOT Racing Replica race 39mm (silks of Ø17mm) for mécaboite minarelli am6

Crankshaft reinforced BIDALOT Racing Replica for minarelli am6.

More
In stock

Reference: 090936B

CARENZI Compétition

Crankshaft, connecting rod assembly CARENZI EVO race 39mm (Ø17mm + Ø17mm bristles) for mécaboite minarelli am6

An ultra reinforced and perfectly balanced crankshaft for AM6. Ideal for large setups.

Price €102.56
Delivered within 5 to 10 days
More
Delivered within 5 to 10 days

Reference: 090935A

CARENZI Compétition

Crankshaft, connecting rod assembly CARENZI Racing race 39mm (Ø17mm + Ø20mm bristles) for mécaboite minarelli am6

A crankshaft, solid, reinforced and of very good quality for a small price.

Price €59.82
At home in 2 to 5 days
More
At home in 2 to 5 days

Reference: 367223

DOPPLER

Crankshaft, connecting rod assembly DOPPLER ENDURANCE race 39mm (Ø20mm bristles) for mécaboite minarelli am6

One of the best quality, price and performance ratios on the market.

Price €108.33
At home in 2 to 5 days
More
At home in 2 to 5 days

Follow us on Facebook