Banner
A reinforced crankshaft at a low price but very well balanced. Ideal for small 70cc or 50cc kit.
ARTEK offers you this reinforced crankshaft for your MINARELLI AM6 engine. This crankshaft is the low price model of the range. First of all, ARTEK thought about high performance by making this crankshaft with solid masses for more pre-compression, these masses are made of high quality treated steel. The connecting rod is mounted on the anti-friction wedge with a reinforced needle cage allowing it to be mounted on small 70cc kits such as AIRSAL cylinders for example. But it can also be mounted on 50cc kits. This crankshaft is designed to easily withstand 12,000 revolutions. It will therefore be strongly discouraged to mount it with an internal rotor ignition by
example.
Technical information:
-Reinforced model
-Full masses
- Silks of Ø20mm and one in Ø17mm origin
- Reinforced connecting rod original size 85mm
-Course: original 39.00mm
Mounts on 50cc motorcycles with gearbox equipped with the minarelli am3, am4, am5, am6 euro 1, am6 euro 2 engine:
APRILIA RS 50cc am6 engine from 1997 to 2006 (warning news after 2006 in derbi euro 3 engine)
APRILIA RX am6 engine (warning news after 2006 in derbi euro 3 engine)
APRILIA MX am6 engine (warning news after 2006 in derbi euro 3 engine)
APRILIA TUONO 50cc am6 engine from 1997 to 2006 (warning news after 2006 in derbi euro 3 engine)
BETA RR
BETA RR ALU
BETA CRE
HONDA HM
HONDA CRE
HONDA BAJA
HUSQUVARNA WXE
HUSQUVARNA CH
HM DERAPAGE
HM CRE
MALAGUTI DRAKON
MALAGUTI XTM
MALAGUTI XSM
FANTIC CABALLERO
PEUGEOT XP6
PEUGEOT XPS
MOTORHISPANIA RYZ
PEUGEOT XPS
PEUGEOT XP STREET
PEUGEOT XP STREET EVO
PEUGEOT XR6
MOTORHISPANIA RX
PEUGEOT XR7
MOTORHISPANIA RX-R
RIEJU RS1
RIEJU RS2
RIEJU RS2 MATRIX
RIEJU RS2 MATRIX PRO
RIEJU SMX
RIEJU MRX
RIEJU SPIKE
KEEWAY TX EN
YAMAHA DT
MBK X-LIMIT
YAMAHA TZR
MBK X-POWER
SHERCO SM
SHERCO ENDURO
SHERCO HRD
SHERCO ENDURO
ICC SM
And many other machines!
Reference: CIG-78R
A reinforced crankshaft for a low engine sound, ideal to accompany a prepared configuration!
Reference: 451390
A very good crankshaft at low prices which will support 50cc kits like 80cc.
Reference: CIG-133R
A reinforced crankshaft for a low solid engine, ideal to accompany a prepared configuration! Stroke slightly increased to 40.7mm!
Reference: VI01
A very well balanced reinforced crankshaft that will support the largest configuration on the market.
Reference: S410130320001
A good crankshaft reinforced and in full masses for your minarelli am6 with bearings of origin size.
Reference: 6030003
High quality crankshaft at low price for am6 engine.
Reference: CIG-29
A reinforced version in solid masses for minarelli am6 with normal size bearings!
Reference: 150838
The most performance crankshaft from ARTEK which can go up to 20,000 revolutions!
Reference: 486138
A solid linkage in full masses, very reinforced and of excellent quality with a low price! Ideal to accompany an original configuration or slightly prepared on mécaboite Minarelli AM6 engine.
Reference: CIG-130R
A reinforced crankshaft for a solid low engine, ideal to accompany a prepared configuration!
Reference: CB.44.8
A horse race between normal and long, wedge assembly without machining or on your small gain am6 and engine capacity (+ 1mm travel).
Reference: CIG-22
A reinforced crankshaft sport for minarelli am6!
Reference: IM07062
An original crankshaft with bearings and spy perfectly adapted to be assembled together, reinforced model which will easily support an original type configuration up to the small 70cc kit.
Reference: 264006
The DOPPLER ER1 is the best value for money on the market, this model is reinforced and well balanced.
Reference: 090936B
An ultra reinforced and perfectly balanced crankshaft for AM6. Ideal for large setups.
Reference: 090935A
A crankshaft, solid, reinforced and of very good quality for a small price.
A reinforced crankshaft at a low price but very well balanced. Ideal for small 70cc or 50cc kit.
