
Reference: 1400
CGN intake pipe with seal and screw Ø19mm by 24mm (PHBG) Peugeot 103 sp, mv, mvl, lm ...
An amazing pipe with a very good finish that will agree very well with a carburetor 18 to 21mm.
Banner
Here is the CGN intake pipe, it is really great! Low price, we just regret that it lacks a micro-balloon internally to avoid gas rebounds and that it is no longer delivered with its gasket and fixing screw as before.
With its fixing in Ø19mm and its internal diameter of 15mm, it will allow you to mount the carburetors from 14 to 16mm SHA This pipe will offer you good performance and it is complete for a reduced price!
Reference: 1400
An amazing pipe with a very good finish that will agree very well with a carburetor 18 to 21mm.
Reference: PIPE-POL-28-D
Pipe POLINI flexible 24-28mm for mopeds with crankcases POLINI!
Reference: 516867
A shorter pipe for a better venturi effect. It will be perfect with a 19 to 21mm carburettor.
Reference: PIPE-POL-21-D
Pipe POLINI flexible 21mm for mopeds with crankcases POLINI!
Reference: 215.0227
High quality intake pipe for mounting PHBG carburetors from 17.5 to 21mm.
Reference: 365641
A shorter pipe for better venturi effect. This pipe is the highest end of the market. It will be perfect with a carburetor 19 to 21mm.
Reference: 02 2083B
The top of the intake pipe to put your PHBG 17.5mm to 21mm on your 103.
Reference: PIPE-MAL-21
3D printed EPC pipe for housings MALOSSI on 103, EUROCILINDRO on MBK 51...
Reference: 02 1690B
An intake pipe adapted for a carburettor of 15mm or 16mm SHA on PEUGEOT 103!
Reference: 1314916B
Ø32mm spare sleeve angled at 90 ° internal for MALOSSI admission kit on VESPA 80, 125, 200 ...
Reference: CAL02RRD
RRD PERFORMANCES wedge for re-orientation and adaptation of MINARELLI AM6 / DERBI valves / pipe on PEUGEOT 103 engine with POLINI housings, with built-in brackets.
Reference: 496075
Ideal in case of breakage or wear your old room.
Reference: pack_pipe_malossi_AM6_DERBI_90°
MALOSSI pipe for adaptation on PEUGEOT 103 / MBK 51 requiring an angled admission! Center distance am6 / DERBI
Reference: 02 6238B
A pipe specially designed for MALOSSI housings. It is very short with good diffusion, micro-blasted and with horizontal bars to avoid any gas rebounds. Clearly a very well worked pipe which will be accompanied by a VL6 valve box or other AM6 valve and a 21mm carburetor.
Reference: 1399
Ideal in case of breakage or wear of your old part.