Reference: 25104.03
Pack seal kit / high engine Ø48mm 80cc PARMAKIT on FANTIC CABALLERO
Complete seal pack for 80cc PARMAKIT air kit on FANTIC CABALLERO
Banner
PARMAKIT 48mm special aluminum FANTIC CABALLERO 50cc 2T kit, dual-segment piston, mid range diagrams placed between torque and power! To be installed with the original cylinder head, delivered with seals, instructions, axis, piston clips, segments, aluminum cylinder ... Made in Italy, excellent manufacturing quality! 48 X 48mm studs.
Optionally we offer a stage 1 preparation, this preparation is a modification of the channels and the exhaust light by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement in the piston and bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
Reference: 25104.03
Complete seal pack for 80cc PARMAKIT air kit on FANTIC CABALLERO
Reference: 64262.00
A high-performance high-end special engine for SACHS 503 and 504 in axis of 14mm with 4 transfers crankshaft long race.
Reference: 168.6006
The POLINI SERIE 6000 kit reproduced for enthusiasts! For 41.6mm stroke.
Reference: 64430.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 12mm with 2 transfers with a long stroke crankshaft.
Reference: 64450.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 14mm with 4 transfers with a short stroke crankshaft.
Reference: 64165.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 12 with 4 transfers with a long stroke crankshaft.
Reference: 85105.00
Kit offering a great increase in torque and power to your ZUNDAPP 603 engine.
Reference: 53498.00
The very last parmakit for 42mm stroke on MINARELLI P6 engine.
Reference: 012002435
A complete set of quality. Guaranteed performance!
Reference: 53488.00
A high performance high-end motor special race 44mm for Minarelli P6! Fixing the exhaust with 3 screws, for RADIAL SYSTEM.
Reference: 074000/1
Very good 70cc kit for SACHS integrated cylinder head! Available with or without intake pipe.
Reference: 063600
ZUNDAPP is very robust and powerful!
Reference: 64432.00
A complete high-performance high-end engine special for SACHS 503 and 504 with a 14mm axle with 2 transfers with a long stroke crankshaft.
Reference: 020000/1
The ATHENA cylinder, piston, cylinder head, Ø48mm kit for SACHS CORSA LUNGA 50.
Reference: 073600
80cc kit with inclined admission, more practical for certain carburetion assemblies!
Reference: 85306.00
The piston-cylinder without cylinder head 70cc for ZUNDAPP air cooling for miniterm engines.
Reference: 85215.00
The high engine complete with cylinder head, 70cc, for ZUNDAPP air cooling, big model flaps!