Reference: 85306.00
Cylinder - Cylinder without piston 70cc Ø45mm PARMAKIT for ZUNDAPP Miniterm CS50, KS50 ...
The piston-cylinder without cylinder head 70cc for ZUNDAPP air cooling for miniterm engines.
Banner
A complete set of rare and high-performance parts for old KREIDLER RS SUPER 50 motor bikes. This high-quality aluminum cylinder comes straight from Made in Italy molds! It has 4 large intake transfers with a lubrication system internal to the cylinder and in accordance with its piston. The architecture and finish are of course excellent and upscale. A huge bar exhaust and high diagrams make this power unit a powerful asset for your 2 wheeler! The piston which accompanies this cylinder is a two-segment model from VERTEX therefore of high quality. With its L-shaped segments it will offer you torque. It is also delivered with its overcompressed cylinder head which will allow you to make the best use of your engine while starting afresh. Clearly, an excellent quality / price / performance ratio to bring your KREIDLER back to life.
We recommend accompanying this kit with at least 17mm carburetion, cold racing spark plug, 100% synthetic racing engine oil, reinforced bearings and crankshaft, racing exhaust ....
This pack contains:
-Aluminum cylinder
-Piston mono-segment
-1 segment
-Piston axis Ø12
-G piston clips
-Cylinder head
-Pack of engine gaskets
-Notice
-Sticker
As an option we offer you a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the piston and the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
Reference: 85306.00
The piston-cylinder without cylinder head 70cc for ZUNDAPP air cooling for miniterm engines.
Reference: 42320.00
A complete high-performance high-end engine special for KREIDLER RS SPORT 50.
Reference: 42105.00
Kit very torquey, robust and powerful for KREIDLER FLORET HP 5.2.
Reference: 30132.00
Kit very torquey, robust and powerful for GUZZI DINGO SPORT 50cc 2T.
Reference: 64430.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 12mm with 2 transfers with a long stroke crankshaft.
Reference: 85438.00
A 70cc kit for ZUNDAPP air cooling for miniterm engines.
Reference: 020000/1
The ATHENA cylinder, piston, cylinder head, Ø48mm kit for SACHS CORSA LUNGA 50.
Reference: 85105.00
Kit offering a great increase in torque and power to your ZUNDAPP 603 engine.
Reference: 148.6002
The POLINI 6000 series kit reproduced for enthusiasts! For 44mm stroke. Have
Reference: 53498.00
The very last parmakit for 42mm stroke on MINARELLI P6 engine.
Reference: 54272.00
Piston cylinder for FBM engine, FBM for FABRICA BOLOGNESE MOTOCICLI was the association of MINARELLI and MORINI!
Reference: 003800
80cc kit of very high quality, complete with valves and pipe for motorization MORINI era!
Reference: 021700
The cylinder kit, piston, cylinder head, Ø48mm ATHENA for P4R, MACAL, MALAGUTI FIFTY ....
Reference: 64262.00
A high-performance high-end special engine for SACHS 503 and 504 in axis of 14mm with 4 transfers crankshaft long race.
Reference: 003100
Very torquey, robust and powerful kit for ZUNDAPP!
Reference: 85215.00
The high engine complete with cylinder head, 70cc, for ZUNDAPP air cooling, big model flaps!