Reference: 64156.02A
Piston mono segment PARMAKIT Ø48mm shaft 14mm for 80cc kit SACHS RS 503,504 long race
The PARMAKIT replacement piston kits for Ø48mm SACHS RS 503, 504 long race.
Banner
A complete set of rare and powerful parts for the old SACHS RS 503 and 504 motorcycles. This high-quality aluminum cylinder comes straight from the Made in Italy molds!
It is equipped with 4 large transfers of admission with a system of lubrication internal to the cylinder and in agreement with its piston. The architecture and finish are of course excellent and upscale.
A massive bar escapement and high diagrams make this power unit a powerful asset for your 2 wheels! The piston that accompanies this cylinder is a mono-segment model from VERTEX so high quality.
With its L-shaped segment, it will give you torque. It is also delivered with supercompresser cylinder head that will allow you to make the most of your engine while starting a new. Clearly, excellent value for money / performance to revive your SACHS.
We recommend to accompany this kit with at least a 21mm carburation, racing cold spark plug, 100% synthetic racing engine oil, reinforced bearings and crankshaft, racing exhaust ...
This pack contains :
Aluminum cylinder 4 transfers with bar escapement
-Virtex VERTEX piston
-Segment in L Ø48mm X 1mm chromed steel
-Axle piston Ø14
-Piston Plungers in G
-Pack motor gaskets
-Notice
-Autocollant
In option we offer a stage 1 preparation, this preparation is a modification of the channels and the exhaust light by increasing the diagrams and improving the pipe, it increases the performance of the cylinder. An improvement of the piston and skirt stocking is also included in this modification. Allow a little extra time for this preparation!
Reference: 64156.02A
The PARMAKIT replacement piston kits for Ø48mm SACHS RS 503, 504 long race.
Reference: 64266.03
Quality, ideal for high engine without leakage with optimal compression!
Reference: 64152.16
Premium segment to refurbish and increase your engine compression!
Reference: 063600
ZUNDAPP is very robust and powerful!
Reference: 64262.00
A high-performance high-end special engine for SACHS 503 and 504 in axis of 14mm with 4 transfers crankshaft long race.
Reference: 64266.00
A high-performance high-end special engine for SACHS 503 and 504 in axis of 12mm with 4 transfers with a long stroke crankshaft.
Reference: 64263.00
A high-performance high-end special engine for SACHS 503 and 504 in axis of 14mm with 2 transfers with a long stroke crankshaft.
Reference: 64430.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 12mm with 2 transfers with a long stroke crankshaft.
Reference: 012002435
A complete set of quality. Guaranteed performance!
Reference: 020306435
Very good little aluminum kit for MORINI M1 engine, M101, M1ES, M1K ... 50 2T!
Reference: 007100
ZUNDAPP is very robust and powerful!
Reference: 53490.00
A high-performance top special range 42mm stroke motor Minarelli P6! Exhaust mounting by 3 screws for RADIAL SYSTEM.
Reference: 074000/1
Very good 70cc kit for SACHS integrated cylinder head! Available with or without intake pipe.
Reference: 64432.00
A complete high-performance high-end engine special for SACHS 503 and 504 with a 14mm axle with 2 transfers with a long stroke crankshaft.
Reference: 64450.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 14mm with 4 transfers with a short stroke crankshaft.
Reference: 133.6005
The kit POLINI SERIE 6000 reproduced for the passionate ones! For 42mm stroke.
Reference: 010500/1
A whole 100% complete, in ATHENA 60cc 42mm diameter. Rare coins, very few are still on sale. MINARELLI P4, P4R, P6, TESTI, MOTRON ... Out of production!
Reference: 54272.00
Piston cylinder for FBM engine, FBM for FABRICA BOLOGNESE MOTOCICLI was the association of MINARELLI and MORINI!
Reference: 53498.00
The very last parmakit for 42mm stroke on MINARELLI P6 engine.