- -10%

Banner
Ideal to start afresh with a complete and powerful engine on your ZUNDAPP like the CS50, KS50 ... 46mm X 46mm
Air intake cooling with flaps, large model otherwise called in Italian SUPERTERM LAMELLARE!
Here is the kit Ø45mm, 70cc, with its cylinder head, its piston vertex mono-segment, 4 transfers to the admission, cylinder in aluminum.
It even comes with its choice of intake pipe for carburettor I DELLORTO (24mm PHBG RIGID and internal fixation 20mm) or BING (fixing 26mm, internal 20mm too).
Optionally we offer a stage 1 preparation, this preparation is a modification of the channels and exhaust light by increasing the diagrams and improving the pipe, it increases the performance of the cylinder. An improvement of the piston and skirt stocking is also included in this modification. Allow a little extra time for this preparation!
Reference: 85210.05
Ideal for installing a carburetor PHBG 19 to 21mm on your motorcycle HONDA, ZUNDAPP ....
Reference: 85211.05
Ideal for installing a carburetor 19 has 24mm on your motorcycle HONDA, ... ZUNDAPP.
Reference: 85210.12
High quality guaranteed with molded aluminum base and strips of karbonit thickness 0,30mm.
Reference: 85206.04
High quality cylinder head 70cc PARMAKIT kit for ZUNDAPP SUPERTERM, CS50, KS50 ...
Reference: 85211.00.pr.st.1
The high engine without cylinder head, 70cc, for ZUNDAPP air cooling, big model with flaps!
Reference: 85210.02
Spare piston for 70cc kit on ZUNDAPP SUPERTERM LAMELLARE CS50, KS50 ...
Reference: 85210.03
Pack of complete seal PARMAKIT for kit 70cc on your motorcycle ZUNDAPP SUPERTERM LAMELLARE CS50, KS50 ...
Reference: 64432.00
A complete high-performance high-end engine special for SACHS 503 and 504 with a 14mm axle with 2 transfers with a long stroke crankshaft.
Reference: 148.6002
The POLINI 6000 series kit reproduced for enthusiasts! For 44mm stroke. Have
Reference: 85206.00
The piston-cylinder without cylinder head 70cc for ZUNDAPP air cooling as the CS50, KS50 ...
Reference: 42115.00
Very torquey, robust and powerful kit for KREIDLER FLORET HP 4,8.
Reference: 85438.00
A 70cc kit for ZUNDAPP air cooling for miniterm engines.
Reference: 020000/1
The ATHENA cylinder, piston, cylinder head, Ø48mm kit for SACHS CORSA LUNGA 50.
Reference: 020306435
Very good little aluminum kit for MORINI M1 engine, M101, M1ES, M1K ... 50 2T!
Reference: 64165.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 12 with 4 transfers with a long stroke crankshaft.
Reference: 073600
80cc kit with inclined admission, more practical for certain carburetion assemblies!
Reference: 53498.00
The very last parmakit for 42mm stroke on MINARELLI P6 engine.
Reference: 85207.00
The complete kit 70cc for ZUNDAPP with its cylinder head!
Reference: 30132.00
Kit very torquey, robust and powerful for GUZZI DINGO SPORT 50cc 2T.
Reference: 85465.00
kit Ø45mm 70cc for ZUNDAP 50 air cooling, admission without valves on cylinder.
Reference: 003800
80cc kit of very high quality, complete with valves and pipe for motorization MORINI era!
Reference: 021700
The cylinder kit, piston, cylinder head, Ø48mm ATHENA for P4R, MACAL, MALAGUTI FIFTY ....
Reference: 020000
The ATHENA cylinder, piston, cylinder head, Ø48mm kit for SACHS CORSA LUNGA 50.