Reference: S410000304002
Clips, piston pin rushes ATHENA in Ø of axis 12mm Type G d.1mm
The ATHENA clips of good quality for 12mm axles with 1mm diameter piston groove!
Banner
12mm piston pin version.
A complete set of rare and high-performance parts for old SACHS long-stroke engine motorcycles.
This high quality aluminum cylinder comes straight out of EUROCILINDRO Made in Italy molds! It has 4 large intake transfers with a lubrication system internal to the cylinder and in accordance with its piston.
The architecture and the finish are of course excellent and upscale. A huge exhaust and high diagrams make this power unit a powerful asset for your 2 wheeler! The piston which accompanies this cylinder is a mono-segment model from VERTEX therefore also of high quality.
With its L-shaped segment it will offer you endless high revs. It is also delivered with its supercharged cylinder head which will allow you to get the most out of your engine while starting afresh.
Clearly, an excellent quality / price / performance ratio to bring your SACHS back to life.
We recommend accompanying this kit with at least 19mm PHBG carburetion, cold racing spark plug, 100% synthetic racing engine oil, reinforced bearings and crankshaft, racing exhaust ...
This pack contains :
-Aluminum cylinder
-Piston VERTEX mono-segment
-Segment in L Ø48mm X 1mm
-Piston axis Ø12mm
-G piston clips
-Pack of engine gaskets
-Pipe admission Ø20 by 26mm
-Notice
-Sticker
Mounts on:
Sachs CORSA LUNGA 50
Reference: S410000304002
The ATHENA clips of good quality for 12mm axles with 1mm diameter piston groove!
Reference: 020502.A
The replacement piston kits ATHENA for Ø48mm on minarelli P4.
Reference: 001716/R
High-end segment to refurbish and increase your engine compression.
Reference: 020503
A complete seal pocket for a waterproof motor!
Reference: 020505
Ideal for mounting a carburettor PHBG from 17.5 to 21mm on your SACHS.
Reference: 020304
An ideal replacement cylinder head after wear, shock, tightening ...!
Reference: 85445.00
The high complete engine with cylinder head, 70cc, ZUNDAPP for air cooling, small model valves!
Reference: 003100
Very torquey, robust and powerful kit for ZUNDAPP!
Reference: 53490.00
A high-performance top special range 42mm stroke motor Minarelli P6! Exhaust mounting by 3 screws for RADIAL SYSTEM.
Reference: 133.6005
The kit POLINI SERIE 6000 reproduced for the passionate ones! For 42mm stroke.
Reference: 42105.00
Kit very torquey, robust and powerful for KREIDLER FLORET HP 5.2.
Reference: 003800
80cc kit of very high quality, complete with valves and pipe for motorization MORINI era!
Reference: 85207.00
The complete kit 70cc for ZUNDAPP with its cylinder head!
Reference: 30132.00
Kit very torquey, robust and powerful for GUZZI DINGO SPORT 50cc 2T.
Reference: 020000
The ATHENA cylinder, piston, cylinder head, Ø48mm kit for SACHS CORSA LUNGA 50.
Reference: 074000/1
Very good 70cc kit for SACHS integrated cylinder head! Available with or without intake pipe.
Reference: 53488.00
A high performance high-end motor special race 44mm for Minarelli P6! Fixing the exhaust with 3 screws, for RADIAL SYSTEM.
Reference: 85307.00
A 70cc kit for ZUNDAPP air cooling for miniterm engines.
Reference: 64165.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 12 with 4 transfers with a long stroke crankshaft.
Reference: 85215.00
The high engine complete with cylinder head, 70cc, for ZUNDAPP air cooling, big model flaps!
Reference: 54272.00
Piston cylinder for FBM engine, FBM for FABRICA BOLOGNESE MOTOCICLI was the association of MINARELLI and MORINI!
Reference: 021700
The cylinder kit, piston, cylinder head, Ø48mm ATHENA for P4R, MACAL, MALAGUTI FIFTY ....