Reference: CI.49.650.G
Cylinder - piston without cylinder head 65cc Ø43mm ITALKIT aluminum for MORINI M1, M101, M1ES 50, M1K engine
Very high performance kit for MORINI M1 / M 101 engine!
Banner
A complete set of rare and high-performance parts for old KREIDLER RS SUPER 50 motor bikes. This high-quality aluminum cylinder comes straight from Made in Italy molds! It has 4 large intake transfers with a lubrication system internal to the cylinder and in accordance with its piston. The architecture and finish are of course excellent and upscale. A huge bar exhaust and high diagrams make this power unit a powerful asset for your 2 wheeler! The piston which accompanies this cylinder is a two-segment model from VERTEX therefore of high quality. With its L-shaped segments it will offer you torque. It is also delivered with its overcompressed cylinder head which will allow you to make the best use of your engine while starting afresh. Clearly, an excellent quality / price / performance ratio to bring your KREIDLER back to life.
We recommend accompanying this kit with at least 17mm carburetion, cold racing spark plug, 100% synthetic racing engine oil, reinforced bearings and crankshaft, racing exhaust ....
This pack contains:
-Aluminum cylinder
-Piston mono-segment
-1 segment
-Piston axis Ø12
-G piston clips
-Cylinder head
-Pack of engine gaskets
-Notice
-Sticker
As an option we offer you a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the piston and the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
Reference: CI.49.650.G
Very high performance kit for MORINI M1 / M 101 engine!
Reference: 42115.00
Very torquey, robust and powerful kit for KREIDLER FLORET HP 4,8.
Reference: 64425.00
A high-performance high-end special engine for SACHS 503 and 504 in axis of 12mm with 2 transfers with a long stroke crankshaft.
Reference: 85120.00
The only kit available on the market for ZUNDAPP liquid cooling SUPER 50 LC, KS50LC ...!
Reference: 42105.00
Kit very torquey, robust and powerful for KREIDLER FLORET HP 5.2.
Reference: 64445.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 12mm with 4 transfers with a short stroke crankshaft.
Reference: 148.6008
The POLINI 6000 series kit reproduced for enthusiasts! For 39.6mm stroke.
Reference: 64168.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 14mm with 4 transfers with a long-stroke crankshaft.
Reference: 54272.00
Piston cylinder for FBM engine, FBM for FABRICA BOLOGNESE MOTOCICLI was the association of MINARELLI and MORINI!
Reference: 148.6002
The POLINI 6000 series kit reproduced for enthusiasts! For 44mm stroke. Have
Reference: 64430.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 12mm with 2 transfers with a long stroke crankshaft.
Reference: 85465.00
kit Ø45mm 70cc for ZUNDAP 50 air cooling, admission without valves on cylinder.
Reference: 063600
ZUNDAPP is very robust and powerful!
Reference: 020000/1
The ATHENA cylinder, piston, cylinder head, Ø48mm kit for SACHS CORSA LUNGA 50.
Reference: 85445.00
The high complete engine with cylinder head, 70cc, ZUNDAPP for air cooling, small model valves!
Reference: 003100
Very torquey, robust and powerful kit for ZUNDAPP!