Banner
The high complete engine with cylinder head, 70cc, ZUNDAPP for air cooling, small model valves!
Ideal for a fresh start with a comprehensive and powerful engine on your ZUNDAPP like CS50, KS50 ... intake air cooling with valves, small otherwise known in Italian Miniterm LAMELLARE! Here the Ø45mm kit, 70cc, with its head, its vertex piston mono-segment, 4 transfers admission, aluminum cylinder, it even comes with its intake pipe choices for carburettor DELLORTO (24mm fixing and RIGID PHBG internal 20mm) or BING (fixing 26mm, 20mm internal too).
Optional we offer a preparation course 1, this preparation is a modification of the channels and the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved piston and bottom skirt is also included in the amendment. Allow a little extra time for this preparation!
Specific References
Reference: 53488.00
A high performance high-end motor special race 44mm for Minarelli P6! Fixing the exhaust with 3 screws, for RADIAL SYSTEM.
Reference: 007100
ZUNDAPP is very robust and powerful!
Reference: 30132.00
Kit very torquey, robust and powerful for GUZZI DINGO SPORT 50cc 2T.
Reference: 85207.00
The complete kit 70cc for ZUNDAPP with its cylinder head!
Reference: 26105.00
Very torquey, robust and powerful kit for FLANDRIA 50cc 2T.
Reference: 64262.00
A high-performance high-end special engine for SACHS 503 and 504 in axis of 14mm with 4 transfers crankshaft long race.
Reference: 85306.00
The piston-cylinder without cylinder head 70cc for ZUNDAPP air cooling for miniterm engines.
Reference: 074000/1
Very good 70cc kit for SACHS integrated cylinder head! Available with or without intake pipe.
Reference: 64445.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 12mm with 4 transfers with a short stroke crankshaft.
Reference: 30122.00
Kit very torquey, robust and powerful for GUZZI DINGO 50cc 2T.
Reference: 020000/1
The ATHENA cylinder, piston, cylinder head, Ø48mm kit for SACHS CORSA LUNGA 50.
Reference: 003100
Very torquey, robust and powerful kit for ZUNDAPP!
Reference: 003800/1
Very high quality 80cc kit, complete with valves and pipe for period MORINI engines!
Reference: 073600
80cc kit with inclined admission, more practical for certain carburetion assemblies!
Reference: 64430.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 12mm with 2 transfers with a long stroke crankshaft.
Reference: 85307.00
A 70cc kit for ZUNDAPP air cooling for miniterm engines.
The high complete engine with cylinder head, 70cc, ZUNDAPP for air cooling, small model valves!
