Reference: 85120.02A
Piston mono segment PARMAKIT by Ø45mm VERTEX axis 12mm for kit 70cc on ZUNDAPP KS SUPER 50 LC
Spare piston kit for 70 ° on ZUNDAPP cc liquid cooled!
Banner
Delivered with its mono-segment vertex piston, seals, aluminum cylinder 4 transfers ... Two lateral and two rear filling. Liquid cooling.
Here is the only high engine still available on the market for the ZUNDAPP liquid cooling SUPER 50 LC, KS 50 LC ...! A real collector's item delivered without cylinder head! Assembly with original cylinder head.
This kit is very powerful and should be accompanied by at least a 21 to 25mm carburetor and a well released exhaust, intake pipe required: 2 screws between 44mm axis. A very beautiful piece, rare on the market!
As an option we offer you a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the piston and the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
Reference: 85120.02A
Spare piston kit for 70 ° on ZUNDAPP cc liquid cooled!
Reference: 31303.16
Segment high quality, ideal for the maintenance of your 70cc PARMAKIT on KS 50 LC, 50 LC SUPER ... From zundapp.
Reference: 85120.03
Complete seal pack for 70cc liquid cooling kit on KS 50 LC, SUPER 50 LC ...
Reference: 54272.00
Piston cylinder for FBM engine, FBM for FABRICA BOLOGNESE MOTOCICLI was the association of MINARELLI and MORINI!
Reference: 30132.00
Kit very torquey, robust and powerful for GUZZI DINGO SPORT 50cc 2T.
Reference: 53488.00
A high performance high-end motor special race 44mm for Minarelli P6! Fixing the exhaust with 3 screws, for RADIAL SYSTEM.
Reference: 53495.00
The latest parmakit for 44mm travel on the MINARELLI P6 engine. Delivered with its cylinder head, exhaust fixing with 3 screws (radial system).
Reference: 64450.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 14mm with 4 transfers with a short stroke crankshaft.
Reference: 007100
ZUNDAPP is very robust and powerful!
Reference: 020000
The ATHENA cylinder, piston, cylinder head, Ø48mm kit for SACHS CORSA LUNGA 50.
Reference: 168.6006
The POLINI SERIE 6000 kit reproduced for enthusiasts! For 41.6mm stroke.
Reference: 53490.00
A high-performance top special range 42mm stroke motor Minarelli P6! Exhaust mounting by 3 screws for RADIAL SYSTEM.
Reference: 42115.00
Very torquey, robust and powerful kit for KREIDLER FLORET HP 4,8.
Reference: 64266.00
A high-performance high-end special engine for SACHS 503 and 504 in axis of 12mm with 4 transfers with a long stroke crankshaft.
Reference: 85465.00
kit Ø45mm 70cc for ZUNDAP 50 air cooling, admission without valves on cylinder.
Reference: 148.6002
The POLINI 6000 series kit reproduced for enthusiasts! For 44mm stroke. Have
Reference: 010500/1
A whole 100% complete, in ATHENA 60cc 42mm diameter. Rare coins, very few are still on sale. MINARELLI P4, P4R, P6, TESTI, MOTRON ... Out of production!
Reference: CI.49.650.G
Very high performance kit for MORINI M1 / M 101 engine!
Reference: 53498.00
The very last parmakit for 42mm stroke on MINARELLI P6 engine.