Complete engine RRD HYPER RACING 80cc Peugeot 103 SP, MV, MVL, VOGUE... liquid cooling

Complete engine assembled RRD 80cc (76.77cc real) liquid cooling for PEUGEOT 103 type SP, MV, MVL, VOGUE, LM....

This engine has been developed by us and tested on different customer engines! The engine arrives assembled ready to run and pre-tuned!

It consists of :

- MALOSSI engine casings, prepared, machined for the passage of the crankshaft and the PARMAKIT 54mm foot kit

-Crankshaft DOPPLER ENDURANCE

-Reinforced polyamide cage bearings and oil seals

-Kit PARMAKIT Ø50mm liquid cooling with 54mm foot, prepared for 128° / 129° / 192° diagrams (take STAGE 2 engine preparation to have these diagrams)

- Flexible adjustable POLINI intake pipe

POLINI CP 24 EVOLUTION carburettor

- MALOSSI MHR VL18 valves

MVT DIGITAL DIRECT variable advance ignition with MVT high voltage coil

- Fasteners, nuts, assembly and metrology, adjustments... Are included in the price.

The air filter, the BR9ES running-in / adjustment candle, the BR10EIX racing candle, the mainspring, the belt and the variator are not supplied and remain at your choice! We recommend lightening the jaws of your original clutch pulley or / and putting hard springs in them!

Exhaust level, alas, very few mufflers at present can make such an engine speak.

The MVT SC can be a good alternative, the SC RACE from MVT too! An old G2 Open can also be a good choice! Until a special large displacement exhaust came out on PEUGEOT 103.

It is therefore an ultra-efficient, very torquey and powerful motor that is delivered to you ready to be used on your chassis with a drive and an air filter of your choice.

Suffice to say that it is in your interest to equip your chassis with brakes and tires worthy of the name! An 11 / 45 transmission can be pulled at 12,000 rpm without problems with top acceleration.

* 400km break-in with SP98 or SP100 / 2.5% oil 100% MOTUL 800 ROAD

** Running in with SP98 or SP100 / 2% to 2.5% oil 100% MOTUL 800 ROAD