Reference: 53495.00
80cc Ø48mm PARMAKIT aluminum kit for minarelli P6 long race 44mm (RADIAL SYSTEM)
The latest parmakit for 44mm travel on the MINARELLI P6 engine. Delivered with its cylinder head, exhaust fixing with 3 screws (radial system).
Banner
A full set of rare performance parts for old motorcycles engine SACHS short stroke RS 503 and 504. This cylinder made of high quality aluminum straight out of molds made in Italy! It has 4 large intake transfers with internal lubrication system to the cylinder and in line with its piston. The architecture and finish are excellent course and upscale. A huge exhaust with bar charts and high engine make this group a powerful asset to your 2 wheels! The piston accompanying this cylinder is a two-segment in VERTEX therefore high quality model. With segments L will offer you the couple. It is also delivered with his head over compress thus allow you to best exploit your engine on and off all nine. Clearly, a quality / price / excellent performance to give your life SACHS.
We recommend to accompany this kit with at least a 17mm carburetor, racing cold plug, engine oil 100% synthetic racing, reinforced crankshaft and bearings, exhaust racing ....
This pack contains:
Aluminum master cylinder 4 transfers with exhaust with bar
-piston VERTEX two-segment
-2 Segments L Ø48mm X 1mm chrome steel
Axis-piston of Ø12mm
Piston -Clips G
-pack Engine seals
-Notice
-Autocollant
Optional we offer a preparation course 1, this preparation is a modification of the channels and the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved piston and bottom skirt is also included in the amendment. Allow a little extra time for this preparation!
Reference: 53495.00
The latest parmakit for 44mm travel on the MINARELLI P6 engine. Delivered with its cylinder head, exhaust fixing with 3 screws (radial system).
Reference: 85306.00
The piston-cylinder without cylinder head 70cc for ZUNDAPP air cooling for miniterm engines.
Reference: 003800/1
Very high quality 80cc kit, complete with valves and pipe for period MORINI engines!
Reference: 012002435
A complete set of quality. Guaranteed performance!
Reference: 53488.00
A high performance high-end motor special race 44mm for Minarelli P6! Fixing the exhaust with 3 screws, for RADIAL SYSTEM.
Reference: 020000/1
The ATHENA cylinder, piston, cylinder head, Ø48mm kit for SACHS CORSA LUNGA 50.
Reference: 133.6005
The kit POLINI SERIE 6000 reproduced for the passionate ones! For 42mm stroke.
Reference: 85207.00
The complete kit 70cc for ZUNDAPP with its cylinder head!
Reference: 010500/1
A whole 100% complete, in ATHENA 60cc 42mm diameter. Rare coins, very few are still on sale. MINARELLI P4, P4R, P6, TESTI, MOTRON ... Out of production!
Reference: 64266.00
A high-performance high-end special engine for SACHS 503 and 504 in axis of 12mm with 4 transfers with a long stroke crankshaft.
Reference: 64262.00
A high-performance high-end special engine for SACHS 503 and 504 in axis of 14mm with 4 transfers crankshaft long race.
Reference: 85206.00
The piston-cylinder without cylinder head 70cc for ZUNDAPP air cooling as the CS50, KS50 ...
Reference: 54272.00
Piston cylinder for FBM engine, FBM for FABRICA BOLOGNESE MOTOCICLI was the association of MINARELLI and MORINI!
Reference: 25104.00
PARMAKIT 80cc special kit for old FANTIC CABALLERO. 48X48mm studs.
Reference: 074000/1
Very good 70cc kit for SACHS integrated cylinder head! Available with or without intake pipe.
Reference: 85211.00.pr.st.1
The high engine without cylinder head, 70cc, for ZUNDAPP air cooling, big model with flaps!