
Reference: 002312
ATHENA Racing fiberglass intake valves for original casings Peugeot 103
The only vulcanized valves on the market for PEUGEOT 103, with the added advantage of fiberglass slats!
Banner
Ideal for your adjustments or the repair of your VL1 valves, this kit consists of 2 high quality carbon slats, one in 0.30mm for engines which have a lower power speed and one in 0.35mm for engines which go up and reveal their high power in the revolutions minutes!
These slats are precut, you just need to mount them on your MALOSSI VL1 valves. (also available in KARBONIT version)
Reference: 002312
The only vulcanized valves on the market for PEUGEOT 103, with the added advantage of fiberglass slats!
Reference: 20 5039
Ideal for gaining performance, especially with large kits!
Reference: 27 5616.C0
A specific high-end set for your VL1 valves! Set your machine to perfection by choosing the best thickness and choosing noble materials for your slats!
Reference: 213.0017
Delivered with pipe and valve seal, carbon single-blade with refined stops ... The top for 103!
Reference: 27 5610.K0
The best to have the quality KARBONIT MALOSSI fiberglass at the correct price, and especially to choose the appropriate thickness for the maximum performance of its engine, is mounted on PIAGGIO CIAO with MALOSSI and PEUGEOT 103 or MBK 51 casings with complete valve box MALOSSI.
Reference: 27 7366.C0
MALOSSI Carbon Cutting Boards available in 0.30, 0.35 and 0.40mm. Top of the line. For manufacturing slats on a 2-stroke engine, thicknesses to choose from!
Reference: 27 2643.K0
The luxury version of the VL7, an aluminum base, vulcanized ...
Reference: 365117
Valves mounted in mono-slat carbon 0.35mm for your 103!
Reference: CAL02RRD
RRD PERFORMANCES wedge for re-orientation and adaptation of MINARELLI AM6 / DERBI valves / pipe on PEUGEOT 103 engine with POLINI housings, with built-in brackets.
Reference: 27 4235.K0
Valves that are suitable for both small and large configurations.
Reference: 213.0524
Ideal for improving your performance.
Reference: 213.0020
Valves for POLINI, DR RACING, ATHENA ...
Reference: 27 5616.K0
Ideal for selecting the right slat thickness for your machine, made of high-end KARBONIT MALOSSI fiberglass.
Reference: 27 5614.K0
A set of KARBONIT slats, very nice to adjust your machine to the thickness of the valve slats by taking advantage of a good quality of KARBONIT fiber for a nicer cost than carbon.
Reference: 2715810.C0
The famous MHR Vl18 valves! Guaranteed performance!
Reference: 20 6138
Ideal to put a carburetor DELLORTO 21 PHBG on your PEUGEOT XP using a system of real valves!