Reference: 213.0036
POLINI carbon competition valves for minarelli am6 / vertical with big valve, MBK 51 with Athena housing
High quality valves, delivered with 2 different thicknesses of carbon slats!
Banner
Malossi valves for Peugeot 103 fitted with a valve box. These VL7 valves are of very good design and exist in 2 ranges:
Equipped with high-end 0.30mm thick carbon strips
Fitted with slightly less high-end 0.30mm Karbonit slats with deferential performance.
These VL7 valves are delivered complete with their seals, choose the desired model before purchase.
Reference: 213.0036
High quality valves, delivered with 2 different thicknesses of carbon slats!
Reference: 27 7366.K0
Two 100X100mm boards in Karbonit MALOSSI available in 0.30, 0.35 and 0.40mm. It can be cut and therefore adapts to all 2-stroke motor vehicles. Choice of thickness.
Reference: 247751
A well worked room for a considerable performance boost on your MBK.
Reference: 004012
Ideal for preparing your engine! High quality, ATHENA Racing valves.
Reference: 27 5618.K0
High-end slats that will allow you to properly adjust your valve box.
Reference: CAL01RRD
RRD PERFORMANCES wedge for re-orientation and adaptation of MINARELLI AM6 / DERBI valves / pipe on MOTOBECANE AV10 / MBK 51 engine with POLINI housings.
Reference: 213.0020
Valves for POLINI, DR RACING, ATHENA ...
Reference: 13700213
Competition valves for BIDALOT G1/G2 casings on MBK 51.
Reference: 4067
Ideal for a refurbishment of the carburation on your moped AV10!
Reference: 20 5123
Out of production.
Reference: 27 5610.K0
The best to have the quality KARBONIT MALOSSI fiberglass at the correct price, and especially to choose the appropriate thickness for the maximum performance of its engine, is mounted on PIAGGIO CIAO with MALOSSI and PEUGEOT 103 or MBK 51 casings with complete valve box MALOSSI.
Reference: 51303.12
Valves with fiberglass slats thickness 0.25mm, ideal for a motor origin until the small kit 70cc.
Reference: 215.0245
High-end POLINI 15mm diameter valve box for MBK 51.
Reference: 213.0599
Planks for manufacturing POLINI carbon valve slats, certified high quality! Available in 0.25, 0.28, 0.30, 0.33, 0.35, 0.40 and 0.45mm. For all 2-stroke engines, choice of thickness!
Reference: 215.0246
High-end 19mm diameter valve box POLINI for MBK 51.
Reference: 213.0013
RACING valves with diffuser, mono-slats for housings POLINI 103, 51, MINICROSS POLINI , APE...