Banner
The best to have the quality KARBONIT MALOSSI fiberglass at the correct price, and especially to choose the appropriate thickness for the maximum performance of its engine, is mounted on PIAGGIO CIAO with MALOSSI and PEUGEOT 103 or MBK 51 casings with complete valve box MALOSSI.
Here is a set of 4 high quality KARBONIT fiberglass slats, this set is mounted on the VL7 and VL8 valves. These slats are therefore mounted on MALOSSI valve box on Peugeot 103, MBK 51 but also on MALOSSI housings on PIAGGIO CIAO.
This game will allow you to adjust the thickness of your slats (0.30mm or 0.35mm) in order to better exploit your power range and therefore gain in performance. In case of sipe breakage or wear, this game is still an ideal faith.
Reference: 51303.12
Valves with fiberglass slats thickness 0.25mm, ideal for a motor origin until the small kit 70cc.
Reference: 213.0020
Valves for POLINI, DR RACING, ATHENA ...
Reference: 27 3021.C0
The famous LV2 carbon version for your AV10 engine MBK 51, MOTOBECANE!
Reference: 247751
A well worked room for a considerable performance boost on your MBK.
Reference: CAL01RRD
RRD PERFORMANCES wedge for re-orientation and adaptation of MINARELLI AM6 / DERBI valves / pipe on MOTOBECANE AV10 / MBK 51 engine with POLINI housings.
Reference: 27 3407.C0
The MALOSSI valves has special specific inclination for the G2 casings of the same brand on MBK 51! Can also be mounted on old motorcycles 80cc 2T YAMAHA and HONDA!
Reference: 27 5618.C0
An excellent game slide for fine adjustments!
Reference: 213.0013
RACING valves with diffuser, mono-slats for housings POLINI 103, 51, MINICROSS POLINI , APE...
Reference: 215.0245
High-end POLINI 15mm diameter valve box for MBK 51.
Reference: 13800213
The intake pipe pack + valves G1 / G2 BIDALOT!
Reference: 4067
Ideal for a refurbishment of the carburation on your moped AV10!
Reference: 215.0246
High-end 19mm diameter valve box POLINI for MBK 51.
Reference: 27 5618.K0
High-end slats that will allow you to properly adjust your valve box.
Reference: 144.405.003
HYPER RACING valves with diffuser, bonded, single-leaf for POLINI 103, 51, MINICROSS POLINI, APE ...
Reference: 27 3021.K0
Competition valves, ideal for large or small configuration, for a gain in power and considerable recovery.
Reference: 213.0032
Spare valves for POLINI casings with incorporated support of PEUGEOT 103 and MBK 51.
The best to have the quality KARBONIT MALOSSI fiberglass at the correct price, and especially to choose the appropriate thickness for the maximum performance of its engine, is mounted on PIAGGIO CIAO with MALOSSI and PEUGEOT 103 or MBK 51 casings with complete valve box MALOSSI.
