Reference: 213.0526
Set of 4 POLINI 0.30 and 0.35mm carbon slats minarelli AM6 valves, vertical minarelli with big valve, mbk 51 Athena housing
High quality carbon slats. Set of 0.30 and play of 0.35mm.
Banner
For those who choose the Italian brand POLINI, here are the valves for 50cc minarelli am6 motorcycle engine or vertical minarelli motor scooter (Big Valve). Its frame is in reinforced ABS, the slats are fixed via square nut screws, the slat stops are unfortunately present and not drilled, the slats are of very high quality carbon 0.30 and 0.35mm to choose from because both are delivered. We therefore recommend thick slats on engines that take very high speeds! The frame (box) is very well worked and short enough to unblock the rear transfer, we will regret the absence of an intake venturi.
Supplied with valve gaskets and 4 slats for adjustments.
The POLINI valve box can be mounted on several models :
-Mécaboite minarelli am6 engines
- MBK 51, AV10 moped engines with ATHENA housings
-The vertical minarelli scooter engines with POLINI Big Valve valve box
Reference: 213.0526
High quality carbon slats. Set of 0.30 and play of 0.35mm.
Reference: CL01
A competition model that will allow you to greatly improve the performance of your AM6.
Reference: 365091
DOPPLER ER3 competition valves with carbon slats!
Reference: 27 7366.C0
MALOSSI Carbon Cutting Boards available in 0.30, 0.35 and 0.40mm. Top of the line. For manufacturing slats on a 2-stroke engine, thicknesses to choose from!
Reference: 13700348
Flaps racing quality BIDALOT for motor bike 50cc AM6.
Reference: 27 4235.K0
Valves that are suitable for both small and large configurations.
Reference: 440167
High quality slats to better exploit the high revs of your motorcycle 50cc am6 engine!
Reference: 1216132B
Required part for perfect operation of the gas supply.
Reference: 2718510
The best way to get MALOSSI carbon quality at the right price, and above all to choose the appropriate thickness for the maximum performance of your engine, is mounted on a VL18 valve box!
Reference: LC.44.400
The must of the admission kits for large configuration with carburetor in 28 to 35mm. Reserved for connoisseurs! Hyper short, super diffusion, carburetor up to 35mm, vibration scrub ... Simply the best.
Reference: 27 5614.K0
A set of KARBONIT slats, very nice to adjust your machine to the thickness of the valve slats by taking advantage of a good quality of KARBONIT fiber for a nicer cost than carbon.
Reference: 9933770
Replacement valve slats for V FORCE boxes on minarelli am6.
Reference: 213.0599
Planks for manufacturing POLINI carbon valve slats, certified high quality! Available in 0.25, 0.28, 0.30, 0.33, 0.35, 0.40 and 0.45mm. For all 2-stroke engines, choice of thickness!
Reference: 9906500
High-end valves, aluminum base with rubber bonded to the carbon plates!
Reference: LC.44.40.1
The famous ITALKIT competition valves with 8 slats for minarelli AM6 and DERBI ! Guaranteed performance!
Reference: 009512
High quality competition valves, bonded aluminum base!
Reference: LC.12.2
High quality competition valves, aluminum base adhered!