![Pipe of admission MALOSSI Ø15mm by 19mm (SHA) Peugeot 103 special vogue Pipe of admission MALOSSI Ø15mm by 19mm (SHA) Peugeot 103 special vogue](https://www.rrd-preparation.com/28969-large_default/pipe-of-admission-malossi-o15mm-by-19mm-sha-peugeot-103-special-vogue.jpg)
Reference: 02 1690B
Pipe of admission MALOSSI Ø15mm by 19mm (SHA) Peugeot 103 sp, mv, mvl, lm ...
An intake pipe adapted for a carburettor of 15mm or 16mm SHA on PEUGEOT 103!
Banner
MALOSSI intake pipe d.15mm inside and 19mm outside (carburetor fixing), for female carburettors.
We regret the absence of an internal microbillage but accompanied by good valves it will allow you good performance. Supplied with studs and nuts for easy assembly!
Specific to PEUGEOT 103 VOGUE new models (since 2000). Alas we must recognize that pipes MALOSSI have become so expensive that it becomes more interesting to install a complete valve box!
Reference: 02 1690B
An intake pipe adapted for a carburettor of 15mm or 16mm SHA on PEUGEOT 103!
Reference: 215.0308
The replacement pipe for valves boxes POLINI on PEUGEOT 103 SP, MV, LM ...
Reference: pack_pipe_malossi_AM6_DERBI_90°
MALOSSI pipe for adaptation on PEUGEOT 103 / MBK 51 requiring an angled admission! Center distance am6 / DERBI
Reference: 496075
Ideal in case of breakage or wear your old room.
Reference: 144.270.001
Flexible polini pipe 21mm for mini-moto and cross 2T POLINI, or mounting on POLINI crankcases with PEUGEOT 103 and MBK 51 supports!
Reference: 02 1690B
An intake pipe adapted for a carburettor of 15mm or 16mm SHA on PEUGEOT 103!
Reference: 02 6488B
A pipe that mounts very well with a PHBG from 17.5 to 21mm. This pipe is corrected and revised for better distribution.
Reference: 1400
An amazing pipe with a very good finish that will agree very well with a carburetor 18 to 21mm.
Reference: 1399
Ideal in case of breakage or wear of your old part.
Reference: 365641
A shorter pipe for better venturi effect. This pipe is the highest end of the market. It will be perfect with a carburetor 19 to 21mm.
Reference: 02 5035B
The best to repair or modify the size of your MALOSSI valve boxes on your PEUGEOT 103 or MBK 51.
Reference: 02 6487B
The best to accompany a 15 or 16mm SHA carburetor on your 103!
Reference: 1402
An intake pipe with a good finish that will allow you to mount your carburetor Ø14 to 16mm while gaining power.
Reference: 1403
A pipe which will be perfect accompanied by a carburettor PHBG 19 to 21mm. This pipe is blasted with a good finish to avoid the rebound of gases.
Reference: 02 2083B
The top of the intake pipe to put your PHBG 17.5mm to 21mm on your 103.
Reference: 928.270.006
POLINI pipe for THOR engine or adaptation on PEUGEOT 103 / MBK 51 requiring an elbow admission!
Special pipe for peugeot 103 vogue, ideal in combination of a carburetor of 15mm SHA and a valve sport!