Inlet pipe for POLINI casings without support incorporated on Peugeot 103 (Ø 15 or 19mm with the choices)

Reference: 02 6488B

Pipe of admission MALOSSI Ø20mm by 24mm (PHBG) Peugeot 103 spx / rcx / clip / mvx

A pipe that mounts very well with a PHBG from 17.5 to 21mm. This pipe is corrected and revised for better distribution.

Reference: 02 6489B

Pipe of admission MALOSSI Ø20mm by 23mm (PHBG) flexible label Peugeot 103 spx, rcx, clip, mvx, vogue

A pipe specially designed for flexible assemblies. This pipe was specially created for the competition. It is therefore mounted with a flexible PHBG carburetor from 15 to 21mm.

Reference: 516867

Inlet pipe DOPPLER OPEN 3D Ø20mm (PHBG) flexible with sleeve for Peugeot 103

A shorter pipe for a better venturi effect. It will be perfect with a 19 to 21mm carburettor.

Reference: 1402

TEKNIX intake pipe Ø15mm by 19mm (SHA) Peugeot 103 spx / rcx / clip / mvx

An intake pipe with a good finish that will allow you to mount your carburetor Ø14 to 16mm while gaining power.

Reference: PIPE-MAL-28

Inlet pipe C. BOUCHET 90° Ø28 to 32mm interax DERBI, PEUGEOT 103, MBK 51, crankcases MALOSSI, EUROCILINDRO

3D printed EPC pipe for housings MALOSSI on 103, EUROCILINDRO on MBK 51...

Reference: PIPE-MAL-21

Intake pipe C. BOUCHET 90° Ø19 to 21mm interax DERBI, PEUGEOT 103, MBK 51, crankcases MALOSSI, EUROCILINDRO

3D printed EPC pipe for housings MALOSSI on 103, EUROCILINDRO on MBK 51...

Reference: 02 1690B

Pipe of admission MALOSSI Ø15mm by 19mm (SHA) Peugeot 103 sp, mv, mvl, lm ...

An intake pipe adapted for a carburettor of 15mm or 16mm SHA on PEUGEOT 103!

Reference: 215.0225

POLINI intake pipe Ø19mm by 24mm (PHBG) peugeot 103 sp, mv, mvl, lm ...

Very good POLINI intake pipe for fitting 17.5 to 21mm PHBG carburettors.

Reference: 215.0370

Intake pipe for POLINI housings incorporated support on Peugeot 103 (Ø 15 or 19mm with the choices)

Intake pipe for POLINI support housings incorporated on PEUGEOT 103.

Reference: 02 6487B

Pipe of admission MALOSSI Ø15mm by 19mm (SHA) Peugeot 103 SPX, CLIP, RCX, MVX ...

The best to accompany a 15 or 16mm SHA carburetor on your 103!

Reference: pack_pipe_malossi_AM6_DERBI_90°

Flexible adjustable MALOSSI intake pipe, at 90° Ø28 to 32mm center distance AM6 / DERBI ( PEUGEOT 103, MBK 51...)

MALOSSI pipe for adaptation on PEUGEOT 103 / MBK 51 requiring an angled admission! Center distance am6 / DERBI

Reference: CAL02RRD

RRD PERFORMANCES check valve adapter for POLINI housings with brackets on PEUGEOT 103

RRD PERFORMANCES wedge for re-orientation and adaptation of MINARELLI AM6 / DERBI valves / pipe on PEUGEOT 103 engine with POLINI housings, with built-in brackets.

Reference: 215.0226

POLINI intake pipe Ø15mm by 19mm (SHA) peugeot 103 SPX, RCX, CLIP, MVX

Intake pipe ideal for fitting SHA 15 or 16mm carburettors.

Reference: 215.0330

Inlet pipe for POLINI casings without support incorporated on Peugeot 103 (Ø 15 or 19mm with the choices)

Reference: 1400

CGN intake pipe with seal and screw Ø19mm by 24mm (PHBG) Peugeot 103 sp, mv, mvl, lm ...

An amazing pipe with a very good finish that will agree very well with a carburetor 18 to 21mm.

Reference: 215.0308

Intake manifold for POLINI check valves Ø15 or 19mm (PHBG or SHA) to the Peugeot 103 choices

The replacement pipe for valves boxes POLINI on PEUGEOT 103 SP, MV, LM ...