Banner
Ideal for gaining performance and solidity at the slightest hit.
Here are the CGN valves for Peugeot 103, these valves are improved in relation to the origin, especially at the level of the slats which is thicker (0.35mm) and which therefore allows you to reach better power regimes (it comes in resonant frequency later).
They have a softer rigid plastic base for the coverslip, changing the coverslip is simple, disassembly via 2 Phillips screws.
Mounts on PEUGEOT 103 MVL, VOGUE, SP, SPX, RCX, TOMOS ...
Reference: 144.405.003
HYPER RACING valves with diffuser, bonded, single-leaf for POLINI 103, 51, MINICROSS POLINI, APE ...
Reference: 213.0020
Valves for POLINI, DR RACING, ATHENA ...
Reference: 20 6138
Ideal to put a carburetor DELLORTO 21 PHBG on your PEUGEOT XP using a system of real valves!
Reference: 27 5614.C0
A premium carbon blade set, ideal for optimal adjustment.
Reference: 213.0013
RACING valves with diffuser, mono-slats for housings POLINI 103, 51, MINICROSS POLINI , APE...
Reference: 635
With its steel slats clicking, original type, good quality!
Reference: 27 2356.K0
Racing valves with a very studied base passed in single-leaf, available in karbonit or carbon!
Reference: 27 5034.K0
What to repair your complete MALOSSI valve box on PEUGEOT 103, MBK 51 ... By having in addition the KARBONIT or CARBON option.
Reference: 365117
Valves mounted in mono-slat carbon 0.35mm for your 103!
Reference: 215.0300
Enough to improve as it should the admission of your 103, ideal accompanied by a 15 or 16mm SHA carburetor!
Reference: 27 2643.K0
The luxury version of the VL7, an aluminum base, vulcanized ...
Reference: 213.0017
Delivered with pipe and valve seal, carbon single-blade with refined stops ... The top for 103!
Reference: 213.0524
Ideal for improving your performance.
Reference: 002312
The only vulcanized valves on the market for PEUGEOT 103, with the added advantage of fiberglass slats!
Reference: 213.0599
Planks for manufacturing POLINI carbon valve slats, certified high quality! Available in 0.25, 0.28, 0.30, 0.33, 0.35, 0.40 and 0.45mm. For all 2-stroke engines, choice of thickness!
Reference: 27 7366.K0
Two 100X100mm boards in Karbonit MALOSSI available in 0.30, 0.35 and 0.40mm. It can be cut and therefore adapts to all 2-stroke motor vehicles. Choice of thickness.
Ideal for gaining performance and solidity at the slightest hit.
