Reference: 09596_00
Clips, needle circlips for DELLORTO PHBG carburetor and others
Ideal in case of loss or breakage.
PEUGEOT 103
MBK 51
MOTOBECANE
PIAGGIO CIAO / VELOFAX
PEUGEOT FOX
HONDA CAMINO, PX, PXR...
DERBI VARIANT
SOLEX
PUCH
MINARELLI AM6
Low-pass exhaust pipe
High-pass exhaust pipe
DERBI Euro 3 / 4 / 5
DERBI Euro 1 & 2
MINARELLI P4 & P6
MINARELLI RV6, RV5, RV4, RV3
SUZUKI SMX, RMX, TSX
YAMAHA TY, RD, DT, MX
HONDA MB, MT, MTX, MBX, NSR R
YAMAHA CHAPPYBanner
Here is an ideal carburettor! It is of very good quality, not very expensive and well suited to small or large configurations, this PHVB model DD is a DELLORTO with cable starter.
With a lubrication, this DELLORTO brand carburettor will delight more than one.
Designed for 2-stroke engines.
Dimensions:
Motor mounting diameter: Ø29mm
Air intake diameter: Ø40mm
If you want to carry out maintenance on your carburetor or make some adjustments to obtain the best performance, you can find spare parts for your carburetor at the bottom of the description.
Reference: 09596_00
Ideal in case of loss or breakage.
Reference: 14958_00
Ideal in case of loss or breakage of your old support, bushel socket.
Reference: 09597_00
The valve spring for your carbs, ideal when the handle returns badly or in the event of loss, wear, breakage...
Reference: 06413_51
Size available 51 240! Sprinklers with INC certified scale to have an as accurate as possible carburetor adjustment. So no loss of power and especially a motor strength at the top.
Reference: 53053_00
A complete kit at a low price, ideal for the maintenance of your carburetor PHBN, PHVA, PHVB ...
Reference: 13709_00
Indispensable for maintaining your tank on DELLORTO PHBN, PHVA carburetor.
Reference: 14371_40
The top to adjust or repair your PHVB carburettor.
Reference: 15377_04
Indispensable for tweaking your settings as much as possible and obtaining optimal operation of your engine. For DELLORTO PHVB and PHVD carburettors.
Reference: 15425_00
The air richness screw for your PHVB carburettors!
Reference: 01411_00
The spring on the air richness screw for your PHVB, FHBC, MA, SI, UA and UB carburettors!
Reference: 14859_00
Complete replacement cover for your DELLORTO PHVa carburettors, 90° angled model.
Reference: 15354_00
Real ideal spare part in case of breakage, wear..., certified DELLORTO . Tank with integrated bleed screw!
Reference: MB15500040
Indispensable for fine-tuning your settings or simply changing your idle jet.
Reference: 53010_00
A pack to switch your carburettors with lever choke to cable choke! Special PHVB carburettor.
Reference: 53108_00
The complete idle screw for your DELLORTO PHVB carburettors.
Reference: 2523
The real DELLORTO PHBG in 18mm!
Reference: 467791
Cheap and quality carburettor because it is located between TNT and DELLORTO.
Reference: 2577
The CS version of the DELLORTO PHBG Ø19.5mm. Excellent quality, with large diameter, rigid intake tulip, choke lever, with possibility of depression or separate lubrication!
Reference: 2587
The AD version of the PHBG DELLORTO, rigid, choke lever and without separate lubrication or depression.
Reference: 2513
The AD version of the PHBG DELLORTO, rigid, lever choke and without separate greasing.
Reference: 201.1904
CP POLINI 19mm version in rigid mounting Indispensable for a prepared engine configuration.
Reference: 134071
Cheap and quality carburettor because it is between the TNT and the DELLORTO .
Reference: 473460
A good quality carburetor for its price which will fuel your engine well but which will not have as good a finish as a DELLORTO.
Reference: 201.1903
The best 19mm carburetor from POLINI and we can say about the whole market! An evolution version CP for maximum performance!
Reference: 201.1902
A very good high quality carburetor at low price, with separate lubrication and vacuum plugs! Choice of cable or lever choke!
Reference: 2594
The most racing version after the black edition of the flexible 19mm PHBG! Aluminum tank with plug, inlet tulip ... Screw-on valve cover!
Reference: 2575
An excellent version of the real PHBG RIGIDE DELLORTO 19mm, this CS has a large intake tulip, a lever choke and a possibility of separate lubrication!
Reference: 467793
A carburetor much better than a TNT but less well finished than a DELLORTO, but it will still provide a good filling of your engine for a relatively low price.
Reference: 2506
The AS 1 version of the real DELLORTO carburettor PHBG, rigid, choke lever without separate lubrication or depression.
Reference: 1179
The DD version on PHVB 19mm, flexible, cable starter! High quality certified!
Reference: 2568
The AS version of the DELLORTO PHBG Ø19,5mm. Excellent quality, with large diameter intake tulip, rigid, choke lever, without possibility of depression or separate greasing!