If you want to preserve low consumption while having more performance than with a SHA or other model for endurance or the road for example, the PHBG model will be a very good compromise. This low-cost carburetor is of very high quality and has a multitude of settings: wealth screw, idle jet, needle valve… This model is the CS (also exists in BD, AD, DS, DD, black models edition, or BS), this 19.5mm is therefore just above the 19mm model. It is rigidly mounted with a lever choke, you can also pass it as a cable choke without difficulty.
Compared to the SHA carburetor, this model is much more precise, efficient at recovery, acceleration and top speed. This model has a separate lubrication, you are not obliged to use it and it is original delivered with a shutter on this socket. This model also comes with a black intake tulip! This tulip improves performance and is Ø60mm, so you can put a Ø60mm fixing filter or remove this tulip to ask a filter Ø PHBG Ø32mm standards.
Advice : accompany it with a 19 or 20mm pipe, carbon valve strips, pipe as much as possible aligned with the valves, you can simply use an original air filter but also a horn. Plan a range of nozzles from 76 to 95 depending on the filter used.
The carburetor is delivered as such :
Main jet small standard pitch: 85
W09 needle
Needle well AN 262
Idle jet 48
Choke nozzle 60
Float in 4 grams
These accessories can be changed for better settings, although these carburetors are very well preset. All spare parts and adjustments can be found here.
.png)
.png)
