Reference: 3463
Paste for adding material and filling aluminum (two-component epoxy) LOCTITE METAL MAGIC STEEL 3463 114g
A material addition paste used by our team for great preparation. The quality is present. Practicality too!
Banner
Here is the PRESTO joint paste for muffler. This paste is not used to plug cracks or holes on your exhaust system. It simply serves to ensure that your pot does not leak at the various joints that the team. It is practical when mounting to glue joints or facilitate the sliding of the joints, sleeves! It must therefore be applied directly to the joint or the socket to obtain a perfect seal. A product not to be neglected for a safe and leak-free assembly as a new part ex factory!
Reference: 3463
A material addition paste used by our team for great preparation. The quality is present. Practicality too!
Reference: 2374
A low viscosity paste which will allow you a perfect sealing of your engine. This paw is often used by professionals.
Reference: 152110
Kit of four 150°C paper seal sheets, different thicknesses included.
Reference: 3479
Large quantity of 500 grams. A professional product, high quality sticks very well, it is flexible and takes well to heat.
Reference: 156189
Two standard joint boards in 0.25 and 0.50mm + BA55 0.3mm cardboard joint + steel reinforced joint in 1mm
Reference: 156190
A standard 0.50mm joint board + BA55 0.5mm cardboard joint
Reference: 187285
Running a special paste for valves 4-stroke engines.
Reference: 440922
A very good quality product, ideal for cutting your own joint.
Reference: P300000999002
Paste with elastic joint and resistant to high temperatures. (300 ° C). In a set of 12 tubes!
Reference: SI 5660
A top-of-the-range joint compound for maximum strength and tightness. This paste resists from -55 ° to 250 ° C without problem.
Reference: 492203
A professional product, high quality, designed to repair any type of plastic body such as bumper, motorcycle fairing, scooter, ....
Reference: M813002000001
Paste with elastic joint and resistant to high temperatures. (300 ° C)
Reference: 168917
A top-of-the-range, quick-setting sealant for maximum resistance and tightness.
Reference: VKM00040
Artein cutting joint sheets
Reference: 152111
Ideal for creating your own engine gasket, carburetor and many other uses.