![Paste for matter addition and stopping metals (epoxy Bi-components) LOCTITE ADHESIVE / LIJM 3090 10g Paste for matter addition and stopping metals (epoxy Bi-components) LOCTITE ADHESIVE / LIJM 3090 10g](https://www.rrd-preparation.com/11198-large_default/paste-for-adding-material-and-filler-metals-epoxy-bi-components-loctite-adhesive-10g-lijm-3090.jpg)
Reference: SI 5660
LOCTITE Silicone Gray Metal Joint Paste 40ml
A top-of-the-range joint compound for maximum strength and tightness. This paste resists from -55 ° to 250 ° C without problem.
Banner
This syringe contains 10g of fast setting adhesive gel form, high resistance power for additions or repair of materials up to 5mm thick, spackling on metal parts, aluminum, ceramic, wood and plastic loaded, paper , leather, rubber .... Color transparent gel, the viscosity is high.
Easy to use and application, curing is fast, its setting time is between 3 to 5 minutes depending on the conditions of preparation of your parts, outside temperature .... His final strength will be reached after 24 hours
A truly professional product for your engine preparations, casings ... and many other uses. Ideal on porous and difficult parts.
Reference: SI 5660
A top-of-the-range joint compound for maximum strength and tightness. This paste resists from -55 ° to 250 ° C without problem.
Reference: VKM00040
Artein cutting joint sheets
Reference: P300000999002
Paste with elastic joint and resistant to high temperatures. (300 ° C). In a set of 12 tubes!
Reference: 171800
Ideal for safe and leak-free mounting of your exhaust.
Reference: 5910
A top-of-the-range joint compound for maximum resistance and tightness. This paste resists from -55 ° to 250 ° C without problem.
Reference: 5926
A high-end sealant for maximum resistance and sealing from -60° to + 250°.
Reference: 440923
ARTEIN self-cut seal sheets 0.15 0.25 and 0.50 mm.
Reference: 183249
A material addition paste used by our team for great preparation. The quality is present. Practicality too!
Reference: 152122
Kit of four reinforced fiber gasket sheets 250°C, different thicknesses included.
Reference: 2374
A low viscosity paste which will allow you a perfect sealing of your engine. This paw is often used by professionals.
Reference: 440924
Cutting sheets to cut yourself ARTEIN 0.8 and 1.2 mm, ideal for the manufacture of cylinder head or exhaust!
Reference: 3479
Large quantity of 500 grams. A professional product, high quality sticks very well, it is flexible and takes well to heat.
Reference: M813002000001
Paste with elastic joint and resistant to high temperatures. (300 ° C)
Reference: 156190
A standard 0.50mm joint board + BA55 0.5mm cardboard joint
Reference: 168917
A top-of-the-range, quick-setting sealant for maximum resistance and tightness.
Fast setting adhesive gel form, high resistance to adding material, filler metals / some plastics, rubber, wood, paper, leather ....