
Reference: 440924
ARTEIN flat reinforced joint sheets 2 layers (0.80 / 1.2mm)
Cutting sheets to cut yourself ARTEIN 0.8 and 1.2 mm, ideal for the manufacture of cylinder head or exhaust!
Banner
Syringe containing 24ml of paste for adding materials or repairing, filling in metal, aluminum, ceramic, wood and loaded plastics parts. Has a high viscosity, gray in color, it has good resistance to water, oil, various lubricants, fuel and has a temperature range from - 55 ° C to + 100 ° C! It is recommended to use it at room temperature 18/26 ° C, its use time before drying is 40min, it hardens in 2 hours and is dry at the same time. Out of the syringe, the paste is rather liquid.
Clearly, a very good product used by professionals for adding material during engine preparation, once dry you can perform machining, drilling, tapping, ... to obtain an optimal result! Ideal on aluminum parts, very easy to use.
Reference: 440924
Cutting sheets to cut yourself ARTEIN 0.8 and 1.2 mm, ideal for the manufacture of cylinder head or exhaust!
Reference: M813002000001
Paste with elastic joint and resistant to high temperatures. (300 ° C)
Reference: 036.163
Elastic joint paste resistant to high temperatures. (300 ° C)
Reference: 156189
Two standard joint boards in 0.25 and 0.50mm + BA55 0.3mm cardboard joint + steel reinforced joint in 1mm
Reference: 440922
A very good quality product, ideal for cutting your own joint.
Reference: 279172
A top-of-the-range joint compound for maximum strength and tightness. This paste resists from -55 ° to 250 ° C without problem.
Reference: P300000999002
Paste with elastic joint and resistant to high temperatures. (300 ° C). In a set of 12 tubes!
Reference: 3479
Large quantity of 500 grams. A professional product, high quality sticks very well, it is flexible and takes well to heat.
Reference: 279134_cgn
A good quality paste that resists up to 180 ° C with a maximum drying time after 24 hours.
Reference: P300000999001
Pack of ATHENA Racing cutting edges with joint pipe.
Reference: 5926
A high-end sealant for maximum resistance and sealing from -60° to + 250°.
Reference: 2374
A low viscosity paste which will allow you a perfect sealing of your engine. This paw is often used by professionals.
Reference: 1379570
Fast setting adhesive gel form, high resistance to adding material, filler metals / some plastics, rubber, wood, paper, leather ....
Reference: 1126647
A paste joined upscale for strength and maximum tightness. This paste is resistant from -70 ° to 200 ° C without problems.
Reference: 440923
ARTEIN self-cut seal sheets 0.15 0.25 and 0.50 mm.
A very well studied paste for filling or repairing your metal, aluminum, ceramic, wood and even plastic parts.