Kit 70cc high engine Ø 47.6mm MALOSSI 7T MHR TEAM TESTA ROSSA FLANGED MOUNT aluminum PIAGGIO / GILERA (Typhoon, nrg...)

Not approved on public roads, only reserved for competition such as the MHR GP 80 and the super moto trophy, the races for which this high engine was created.

Installation with 85mm long connecting rod crankshaft! Cannot be installed with an original size 80mm connecting rod!!! For normal stroke 39.2mm, piston pin Ø12mm standard! Cannot be installed with the original casing unlike the standard model, this FLANGED MOUNT with specific center distance requires MALOSSI RC ONE casings!

Here is the very latest MALOSSI MHR TEAM 70cc, this cylinder has already been the must for years... This new version has been revised and corrected! As usual with MALOSSI MHR , the finish is impeccable, each part has been over-studied... This kit is even more efficient than its predecessor thanks to a huge bar exhaust and 7 intake transfers!

The diagrams are also revised upwards (everyone found the old team slightly too torquey despite the high revs). The port and exhaust diagram is extremely well done! (a tolerance of only 5 hundredths of a millimeter!).

Obviously the compression ratio is very well adapted, enough to make you think about saying goodbye to your old engine. Malossi has hit hard again! At the moment, no cylinder is capable of achieving such performance on a scooter in this category. With its diameter of 47.6mm this cylinder offers very satisfactory power!

For the best you will need to align the transfers to the engine casings. The cylinder has one of the highest-end nicasil treatments on the market, the piston has a very high silicon content and an extra fine single segment (0.80mm) hard chrome domed to allow the highest speeds and very low wear. ..

The cylinder head is a stud model, in two parts in order to improve cooling as much as possible, the combustion chamber is a frustoconical model with a polished finish. You will tighten the cylinder head stud without the cylinder head cover!

This technique allows for ever more precise tightening! Especially on a machined finish cylinder head stud, reinforced MALOSSI MHR studs, special reinforced MALOSSI MHR nuts. In short, this cylinder is a performance monster! Certainly the best of all scooter kits at the moment.

As an option we offer you a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the conduit, it increases the performance of the cylinder. An improvement to the piston and skirt bottoms is also included in this modification. Allow a little extra time for this preparation!

Mounts on :

APRILIA SR (carb.) 50 2T LC 2004-> ( PIAGGIO )
MODIFICATIONS ON the crankcase: BORE AND ADJUSTMENT - To be associated EXCLUSIVELY with crankshafts 53 9212 - 5316005 (53 9703 - 5314544 - 5314887)

APRILIA SR 50 2T LC euro 4 ( PIAGGIO CA81M)
MODIFICATIONS ON the crankcase: BORE AND ADJUSTMENT - To be associated EXCLUSIVELY with crankshafts 53 9212 - 5316005 (53 9703 - 5314544 - 5314887) - For the correct installation of the thermal unit it is necessary to fit the ADAPTER for temperature SENSOR ref. 1518132B

APRILIA SR R (carb.) 50 2T LC ( PIAGGIO )
MODIFICATIONS ON the crankcase: BORE AND ADJUSTMENT - To be associated EXCLUSIVELY with crankshafts 53 9212 - 5316005 (53 9703 - 5314544 - 5314887)

APRILIA SR Street 50 2T LC euro 2
MODIFICATIONS ON the crankcase: BORE AND ADJUSTMENT - To be associated EXCLUSIVELY with crankshafts 53 9212 - 5316005 (53 9703 - 5314544 - 5314887)

DERBI GP1 50 2T LC
MODIFICATIONS ON the crankcase: BORE AND ADJUSTMENT - To be associated EXCLUSIVELY with crankshafts 53 9212 - 5316005 (53 9703 - 5314544 - 5314887)

DERBI GP1 OPEN 50 2T LC
MODIFICATIONS ON the crankcase: BORE AND ADJUSTMENT - To be associated EXCLUSIVELY with crankshafts 53 9212 - 5316005 (53 9703 - 5314544 - 5314887)

DERBI GP1 REVOLUTION 50 2T LC
MODIFICATIONS ON the crankcase: BORE AND ADJUSTMENT - To be associated EXCLUSIVELY with crankshafts 53 9212 - 5316005 (53 9703 - 5314544 - 5314887)

GILERA DNA 50 2T LC
MODIFICATIONS ON the crankcase: BORE AND ADJUSTMENT - To be associated EXCLUSIVELY with crankshafts 53 9212 - 5316005 (53 9703 - 5314544 - 5314887)

GILERA RUNNER SP 50 2T LC MODIFICATIONS ON the crankcase: BORE AND ADJUSTMENT - To be associated EXCLUSIVELY with crankshafts 53 9212 - 5316005 (53 9703 - 5314544 - 5314887)

GILERA RUNNER SP 50 2T LC 2006-> (C451M)
MODIFICATIONS ON the crankcase: BORE AND ADJUSTMENT - To be associated EXCLUSIVELY with crankshafts 53 9212 - 5316005 (53 9703 - 5314544 - 5314887)

GILERA RUNNER 50 2T LC
MODIFICATIONS ON the crankcase: BORE AND ADJUSTMENT - To be associated EXCLUSIVELY with crankshafts 53 9212 - 5316005 (53 9703 - 5314544 - 5314887)

PIAGGIO NRG EXTREME 50 2T LC
MODIFICATIONS ON the crankcase: BORE AND ADJUSTMENT - To be associated EXCLUSIVELY with crankshafts 53 9212 - 5316005 (53 9703 - 5314544 - 5314887)

PIAGGIO NRG MC2 50 2T LC MODIFICATIONS ON the crankcase: BORE AND ADJUSTMENT - To be associated EXCLUSIVELY with crankshafts 53 9212 - 5316005 (53 9703 - 5314544 - 5314887)

PIAGGIO NRG MC2 50 2T LC 1998->
MODIFICATIONS ON the crankcase: BORE AND ADJUSTMENT - To be associated EXCLUSIVELY with crankshafts 53 9212 - 5316005 (53 9703 - 5314544 - 5314887)

PIAGGIO NRG 50 2T LC
MODIFICATIONS ON the crankcase: BORE AND ADJUSTMENT - To be associated EXCLUSIVELY with crankshafts 53 9212 - 5316005 (53 9703 - 5314544 - 5314887)

NRG MC3 DD 50 2T LC
MODIFICATIONS ON the crankcase: BORE AND ADJUSTMENT - To be associated EXCLUSIVELY with crankshafts 53 9212 - 5316005 (53 9703 - 5314544 - 5314887)

PIAGGIO NTT 50 2T LC
MODIFICATIONS ON the crankcase: BORE AND ADJUSTMENT - To be associated EXCLUSIVELY with crankshafts 53 9212 - 5316005 (53 9703 - 5314544 - 5314887)

PIAGGIO NRG Power DD 50 2T LC
MODIFICATIONS ON the crankcase: BORE AND ADJUSTMENT - To be associated EXCLUSIVELY with crankshafts 53 9212 - 5316005 (53 9703 - 5314544 - 5314887)
PIAGGIO QUARTZ 50 2T LC
MODIFICATIONS ON the crankcase: BORE AND ADJUSTMENT - To be associated EXCLUSIVELY with crankshafts 53 9212 - 5316005 (53 9703 - 5314544 - 5314887)

PIAGGIO ZIP SP 50 2T LC 2001->
MODIFICATIONS ON the crankcase: BORE AND ADJUSTMENT - To be associated EXCLUSIVELY with crankshafts 53 9212 - 5316005 (53 9703 - 5314544 - 5314887)

PIAGGIO ZIP SP 50 2T LC
MODIFICATIONS ON the crankcase: BORE AND ADJUSTMENT - To be associated EXCLUSIVELY with crankshafts 53 9212 - 5316005 (53 9703 - 5314544 - 5314887)