Banner
Kit very torquey, robust and powerful for KREIDLER FLORET HP 5.2.
Part become very rare, here is a kit for engines KREIDLER FLORET HP 5.2. This high performance kit from PARMAKIT is very robust, powerful and torquey!
It consists of a nicasil treated aluminum cylinder, a single-segment vertex piston! Diagrams, compression ratio, ducts ...
Everything is designed to achieve excellent engine performance. It mounts in combination with the original breech!
We recommend a 17.5 to 21mm carburetor and a sport exhaust!
The diameter of the cylinder is Ø44mm, actual displacement 69cc, axis of the piston is Ø14mm, 2 transfers.
Optionally we offer a stage 1 preparation, this preparation is a modification of the channels and exhaust light by increasing the diagrams and improving the pipe, it increases the performance of the cylinder. An improvement of the piston and skirt stocking is also included in this modification. Allow a little extra time for this preparation!
Specific References
Reference: 42204.03
Pack of complete seal for kit 70cc Ø44mm PARMAKIT aluminum for KREIDLER FLORET HP 5,2.
Reference: 42115.02
The replacement piston by VERTEX for kits 70cc Ø44mm PARMAKIT aluminum for KREIDLER FLORET HP 5.2.
Reference: 42115.16
Top-of-the-range Ø44mm x 1.5mm PARMAKIT segment to refurbish and increase your KREIDLER FLORET HP 5.2 engine compression!
Reference: 64450.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 14mm with 4 transfers with a short stroke crankshaft.
Reference: 42307.00
A high-performance and full high special range for motor KREIDLER RS 50 SUPER.
Reference: 85438.00
A 70cc kit for ZUNDAPP air cooling for miniterm engines.
Reference: 073600
80cc kit with inclined admission, more practical for certain carburetion assemblies!
Reference: 30132.00
Kit very torquey, robust and powerful for GUZZI DINGO SPORT 50cc 2T.
Reference: 25104.00
PARMAKIT 80cc special kit for old FANTIC CABALLERO. 48X48mm studs.
Reference: 021700
The cylinder kit, piston, cylinder head, Ø48mm ATHENA for P4R, MACAL, MALAGUTI FIFTY ....
Reference: 64168.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 14mm with 4 transfers with a long-stroke crankshaft.
Reference: 148.6008
The POLINI 6000 series kit reproduced for enthusiasts! For 39.6mm stroke.
Reference: 012002435
A complete set of quality. Guaranteed performance!
Reference: 010500/1
A whole 100% complete, in ATHENA 60cc 42mm diameter. Rare coins, very few are still on sale. MINARELLI P4, P4R, P6, TESTI, MOTRON ... Out of production!
Reference: 074000/1
Very good 70cc kit for SACHS integrated cylinder head! Available with or without intake pipe.
Reference: 85307.00
A 70cc kit for ZUNDAPP air cooling for miniterm engines.
Reference: 64430.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 12mm with 2 transfers with a long stroke crankshaft.
Reference: 003800
80cc kit of very high quality, complete with valves and pipe for motorization MORINI era!
Reference: 54272.00
Piston cylinder for FBM engine, FBM for FABRICA BOLOGNESE MOTOCICLI was the association of MINARELLI and MORINI!
Kit very torquey, robust and powerful for KREIDLER FLORET HP 5.2.
