Banner
A pre-adjusted MALOSSI carburettor kit delivered ready to be mounted on a pipe with flexible Ø37mm sleeve on vespa PK 50cc 2T.
Not homologated on public roads, reserved for competition.
Ideal on a scooter with a sports exhaust and why not a kit, an ignition...Here is the carburettor kit including the famous MALOSSI PHBL 25mm flexible to be installed on the housing, delivered with the 20-25 Ø37mm sleeve.
The kit comes with a sports air filter specifically designed for VESPA. And the cables for the assembly! It is already preset, you can tweak the settings if desired but it is not even mandatory. This pack includes a valve system specially designed for large kits. This kit allows you to switch to a valve system (gain of torque and high speed) and allows you to switch to a large PHBL carburettor. Planned for cable choke like the original. Adjustment screws specifically placed for VESPA!
This complete and pre-tuned kit will be delivered to you as pictured with:
LONG GAS CABLE. sheath 2055 mm - Ø wire 1.2mm
STARTER CABLE LONG. sheath 144.5 mm - Ø wire 0.8 mm
VALVE VL6 lam.CARB. thickness.0.30
VALVE VL6 lam.KARB. thickness.0.30
COLLAR h.9 mm tightening 25 ÷ 45
COLLAR h.9 mm tightening 32 ÷ 50
DIVE HOSE SET 160° long. 50mm - threaded ext. M6x0.75x7.5/internal M5x0.75x15mm
SLEEVE for carb. PHBL 20-25B (37mm)
PHBL 25 B VESPA SP-PK 50 (valve-CVFL)
POCH. GASKETS VESPA 50-125
RED FILTER E14 Ø 38 inclined 30° PHBL 22
CABLE CLAMPxACCELERAT. Ø 5.5x9
Mounts on:
VESPA PK 50
Reference: 215.0118
Valve system with flexible sleeve for increased power and torque!
Reference: 215.0115
Inlet kit with single-flap valves! Gain of torque and very high power in relation to a mounting without valves.
Reference: 215.0232
Ideal to pass on a system has flaps and thus to gain in couple, power and consomation! To accompany a 17,5mm POLINI CP special for the best!
Reference: 215.0203
Unique and powerful design, POLINI monolamelle system for VESPA carburizing scooter in 19 or 21mm diameter with 2 fixing holes. For carburettors origin or CP POLINI!
Reference: 02 5084B
Ideal for improving and optimizing the performance of your PIAGGIO APE scooter.
Reference: 215.0270
Valve inlet kit for increased performance, pipe fitting Ø 23mm.
Reference: 215.0162
Ideal for improving and optimizing the performance of your VESPA scooter.
Reference: 215.0117
Ideal to pass on a system has flaps and thus to gain in couple, power and consomation! To accompany a 17,5mm POLINI CP special for the best!
Reference: 11251700
Replacement aluminum intake sleeve for your VESPA!
Reference: 215.0163
For an improved admission with carburettor POLINI CP 24mm flexible mounting, fixing by 3 holes!
Reference: 215.0272
The best way to mount a big PWK carburetor on your PIAGGIO APE by gaining performance!
Reference: 215.0204
Ideal to pass on a system has flaps and thus to gain in couple, power and consomation! To accompany a 17,5mm POLINI CP special for the best!
Reference: 215.0231
Unique and efficient design, POLINI mono-lamella system for VESPA scooter in diameter 19mm for POLINI or original carburetor with 3 fixing holes.
Reference: 215.0230
Unique and efficient design, POLINI single-leaf system for VESPA scooter, Ø24mm 3 fixing holes.
Reference: 02 4957B
Ideal to improve and optimize the performance of your scooter VESPA 50 and 125cc.
Reference: 15801000
Replacement intake manifold for your VESPA!
A pre-adjusted MALOSSI carburettor kit delivered ready to be mounted on a pipe with flexible Ø37mm sleeve on vespa PK 50cc 2T.
