Banner
The best way to mount a large PHBL carburetor on your VESPA ETS and PK 50 or 125cc and increase your performance!
Ideal for a good big kit on your VESPA, here is the special PHBL admission kit on VESPA ETS and PK 50 or 125cc. This kit allows you to switch to a valve system (torque gain and high speed) and allows you to switch to a large PHBL carburetor.
The outer diameter of the sleeve is 30mm on both sides and Ø25 and 29mm for the interior ... This kit is therefore suitable for PHBL carburetors from 20 to 25mm! The part is delivered complete with pipe, sleeve, collars, gaskets, screws, box, valves, carbon slats, cut stops ... Internal diameter of the sleeve of 36mm!
This carburetion kit includes :
-CLAPET VL6 lam.CARB. ep. 0.30
-DIFFUSER VALVE VL6-VL15
-SLEEVE for carb. PHBL 20-25 B (37 mm)
-POCH. JOINTS ADM. VESPA 50-125
Mounts on :
VESPA ETS 125
VESPA PK XL 125
VESPA PK HP 50
VESPA PK XL 50
Reference: 215.0233
For an improved admission with carburettor POLINI CP 24mm, fixing by 3 holes! High performances guaranteed!
Reference: 215.0005
Black painted steel pipe for 16/16 carburettors on VESPA 50 SPECIAL 2T.
Reference: 1610843
A pre-adjusted MALOSSI carburettor kit delivered ready to be mounted on a pipe with flexible Ø37mm sleeve on vespa PK 50cc 2T.
Reference: 15801000
Replacement intake manifold for your VESPA!
Reference: 02 5084B
Ideal for improving and optimizing the performance of your PIAGGIO APE scooter.
Reference: 215.0203
Unique and powerful design, POLINI monolamelle system for VESPA carburizing scooter in 19 or 21mm diameter with 2 fixing holes. For carburettors origin or CP POLINI!
Reference: 215.0118
Valve system with flexible sleeve for increased power and torque!
Reference: 215.0117
Ideal to pass on a system has flaps and thus to gain in couple, power and consomation! To accompany a 17,5mm POLINI CP special for the best!
Reference: 215.0115
Inlet kit with single-flap valves! Gain of torque and very high power in relation to a mounting without valves.
Reference: 215.0002
Pipe for small carburetors rigid or large carburetors flexible assembly!
Reference: 215.0232
Ideal to pass on a system has flaps and thus to gain in couple, power and consomation! To accompany a 17,5mm POLINI CP special for the best!
Reference: 215.0270
Valve inlet kit for increased performance, pipe fitting Ø 23mm.
Reference: 215.0205
For improved intake (to pass over valve system) with carburettor POLINI CP or other flexible mounting in Ø22 to 26mm, fixing by 2 holes as the origin.
Reference: 215.0112
Valve inlet pipe for special kit POLINI 140.0051 / L.
Reference: 11251700
Replacement aluminum intake sleeve for your VESPA!
Reference: 215.0116
Inlet kit with single-flap valves! Gain of torque and very high power in relation to a mounting without valves. For carburetor of origin or CP 19 and 21mm rigid special or flexible standard.
The best way to mount a large PHBL carburetor on your VESPA ETS and PK 50 or 125cc and increase your performance!
