Banner
For improved intake (to pass over valve system) with carburettor POLINI CP or other flexible mounting in Ø22 to 26mm, fixing by 2 holes as the origin.
Here is the intake pipe, high-end aluminum collector POLINI for scooter VESPA. Excellent quality, with flexible sleeve Ø28,5mm and allow to install a specific carburetor POLINI CP or other like a PHBL, PHBH, VHST ... In Ø22 has 26mm, or a carburator POLINI 24mm CP reference 201.2402 to accompany a pushed or even original engine configuration.
Delivered complete as presented with joints, screws., Necklaces ... Increases enormously the performances because passes on a valve system, also reduces consumption, polution, improves the couple, the recovery, the high revs! Fixing by 2 holes as the origin, for scooter which does not have valves of origin.
Mounts on:
-VESPA: VESPA 50 PK - VESPA 50 XL - VESPA 125 PK - VESPA 125 XL ...
Reference: 213.0012
High-end valves complete with slats. To be assembled in the pipes admission kits with POLINI valves from VESPA, APE ...
Reference: 201.2402
A flexible carburetor delivered ready to be mounted on a pipe with flexible sleeve Ø28.5mm on vespa 50 and 125 2T.
Reference: 215.0203
Unique and powerful design, POLINI monolamelle system for VESPA carburizing scooter in 19 or 21mm diameter with 2 fixing holes. For carburettors origin or CP POLINI!
Reference: 20 5461
The best way to mount a large PHBL carburetor on your VESPA ETS and PK 50 or 125cc and increase your performance!
Reference: 215.0272
The best way to mount a big PWK carburetor on your PIAGGIO APE by gaining performance!
Reference: 215.0163
For an improved admission with carburettor POLINI CP 24mm flexible mounting, fixing by 3 holes!
Reference: 215.0233
For an improved admission with carburettor POLINI CP 24mm, fixing by 3 holes! High performances guaranteed!
Reference: 02 5084B
Ideal for improving and optimizing the performance of your PIAGGIO APE scooter.
Reference: 215.0006
Intake pipe for POLINI CP carburettors or other flexible assemblies.
Reference: 20 4709
Inlet pipe for MALOSSI carburettors or other soft mountings on your VESPA scooter.
Reference: 215.0231
Unique and efficient design, POLINI mono-lamella system for VESPA scooter in diameter 19mm for POLINI or original carburetor with 3 fixing holes.
Reference: 215.0162
Ideal for improving and optimizing the performance of your VESPA scooter.
Reference: 215.0232
Ideal to pass on a system has flaps and thus to gain in couple, power and consomation! To accompany a 17,5mm POLINI CP special for the best!
Reference: 5304
Intake pipe for your SHBC 19.19 carburettor.
Reference: 1610843
A pre-adjusted MALOSSI carburettor kit delivered ready to be mounted on a pipe with flexible Ø37mm sleeve on vespa PK 50cc 2T.
Reference: 11251700
Replacement aluminum intake sleeve for your VESPA!
Reference: 215.0112
Valve inlet pipe for special kit POLINI 140.0051 / L.
Reference: 215.0204
Ideal to pass on a system has flaps and thus to gain in couple, power and consomation! To accompany a 17,5mm POLINI CP special for the best!
For improved intake (to pass over valve system) with carburettor POLINI CP or other flexible mounting in Ø22 to 26mm, fixing by 2 holes as the origin.
