Reference: 629.0012/GT
Crankshaft, connecting rod assembly FURYTECH Racing race 40mm for mécaboite driving DERBI euro 1 & 2 except GPR
The famous crankshaft FURYTECH for motorcycle DERBI engine euro 1 and 2.
Banner
Here is the strongest crankshaft from ARTEK for your DERBI EURO 1 and 2. a reinforced model, balanced is in full masses, it is really intended for the reinforcement of the low engine and the performance, it is certainly the most studied crankshaft of the market. What are the differences with the K1? The connecting rod, the materials used, the tolerance to high speeds .... More clearly the reinforcement and the balancing which are even more neat! The steels used are of the highest quality, they are treated and well hardened, the balancing is dynamic and really neat! The connecting rod is a very high-end model lightened in H with grease at the head and small end. It is placed on a reinforced crankpin of 18 mm against the original 16 and a well increased cage with anti-friction wedges. Clearly, this crankshaft will withstand most very equipped engines. Capable of going up to 18,000 revolutions, it will hold without worry on an 80cc MHR TEAM with internal rotor ignition for example.
Characteristics:
-Masses: full
-Soies (bearing seats): in original diameter Ø20mm
-Reinforced connecting rod original size 90mm
-Original stroke 40.00mm
- Keying: yes
-Delivered with its needle cage
Reference: 629.0012/GT
The famous crankshaft FURYTECH for motorcycle DERBI engine euro 1 and 2.
Reference: 451391
TEKNIX reinforced crankshaft for engine DERBI euro 1 and 2. A solid model at great price!
Reference: 518458
Set cast iron kit 50 + reinforced crankshaft in full masses for DERBI EURO 2 (until 2006).
Reference: 12100054
The famous crankshaft BIDALOT RACING REPLICA for motor bike 50cc DERBI, unbeatable quality has unbeatable prices.
Reference: VI02
An upscale crankshaft that will support the highest engine configurations.
Reference: IM07063
Vilo with bearings and spy tailored to fit together, reinforced model that withstand today an original type of configuration to small 70cc.
Reference: 5312590
The best original racing crankshafts for GPR.
Reference: 486139
A connecting rod assembly reinforced in full masses, solid and excellent quality with a low price! Ideal to accompany a configuration origin or slightly prepared on mécaboite Derbi Euro 2 engine, except GPR.
Reference: 6030004
Original type crankshaft for old DERBI air-cooled engines.
Reference: CIG-44
A very good crankshaft compare to the sport models it is very well balanced with a reinforced rod with a crankpin increased. It will therefore support large 70cc kits.
Reference: 367443
One of the best value / market price. Very well balanced full-body, of course enhanced to support larger configurations.
Reference: CIG-24
A very good crankshaft compare models sport it is very well balanced with a reinforced rod with a plus pin. It will therefore withstand large kits 70cc.
Reference: CIG-128R
The crankshaft of the must in BARIKIT. It is perfectly balanced, it is mounted on a reinforced rod which is also based on a plus pin.
Reference: CIG-77R
The crankshaft of the must in BARIKIT. It is perfectly balanced, it is mounted on a reinforced rod which is also based on a plus pin.
Reference: CIG-131R
The must of BARIKIT crankshaft. It is perfectly balanced, it is mounted on a reinforced connecting rod which also rests on an increased crankpin.
Reference: CIG-19
A cheap high quality crankshaft which will support large and small 50cc 70cc. Ideal in case of breakage or wear your old crankshaft.