Certified DELLORTO INC! Choose real DELLORTO quality!
The DELLORTO Ø21mm PHBG DS racing black edition carburettor is a PHBG carburettor revised and corrected by the Italian Dellorto technicians in order to obtain even better performance as well as a simpler adjustment. For example, the needle is no longer disassembled with 2 screws but with an aluminum cap that can be unscrewed at the top and the nozzle can be disassembled without removing the tank, simply by removing the aluminum tank cap! This carburetor is of very good design and quality.
The needle, float, plug… remain identical to the normal PHBG. The alloy is of better quality, the machining also allows less rebounds of better performances by its micro scoring and shape of grip! We will regret the lack of finishing and polishing on the air filter side. The tank is it obviously in aluminum. The Ø21mm has the same body as the Ø19mm.
Material type :
-Dellorto primary jet of 92 in small steps
- Needle: type W 7
-Cutting bushel: 40 degree
-Size 60 choke nozzle
-Size 50 idle jet
- AN type needle well in size 262
-The choke is cable and the carburetor is male.
- float 4 grams
-Outside diameter pipe side : 25mm
-Outside diameter filter side : air 31 without cover, and 40 with the supplied tulip cover (mounting this tulip is also recommended).
In short it is an excellent carburettor well manufactured and thought for simple adjustments, good performance, low consumption all in a racing aesthetic. It is a carburetor widely used in competition, in endurance, on the road thanks to these various possible and simple settings, the low price of these parts, its low consumption, the ease of finding repair parts and adjustments, its racing aesthetic. ..
-Starter : cable (possibility to switch it to lever)
-Possibility of vacuum valve : yes but not compulsory (delivered with shutter)
-Separate greasing : yes but not compulsory (delivered with shutter)
Certified DELLORTO INC! Choose real DELLORTO quality!
The replacement and adjustment bushel for your PHBG carburettors, 30° or 40° cut more aggressive choices!
The complete richness screw for your PHBG carburettors!
The replacement tank at low prices for your DELLORTO carburettors.
Needle, essential for adjustments or at the slightest wear, irregularity.
Ideal in case of loss or breakage.
Ideal in case of problem, breakage or loss of your old part!
A pack to switch your PHBG carburettors choke lever to cable choke!
Ideal in case of loss or breakage of your old support, bushel socket.
The valve spring for your carbs, ideal when the handle returns badly or in the event of loss, wear, breakage...
Idle jet for PHBG and PHBD carburettors, to obtain a correct idle when the bushel is at the bottom! With a good reaction to the opening bushel!
Essential part for the proper functioning of your carburetor, several sizes to choose from to fine-tune your settings!
Essential part for the operation of your carburetor, ideal in case of wear or breakage ...
Essential part of your carburettor PHBG for better mixing oil / petrol! Not deep model for jet small step 5mm.
The bowl bottom also called anti-emulsion washer ... Indispensable for the proper functioning of your carburetor and oil / gasoline mixing!
Ideal to pass your choke cable pull or to repair your PHBG!
A mass-machined brass cap for your carburetors with aluminum tank or racing black edition!
The aluminum racing tank, mounts on all PHBG carburettors, to remove your jets faster, drain faster and get more strength!
Arises directly in the plug cover, also available in angled with adjuster.
A tulip which increases the venturi effect therefore the efficiency of your engine.
A necessary part for the proper functioning of your carburetor.
A small spring that is important. Ideal for lost or worn for a refurbishment cost.
Ideal for refurbishment or for loss.
Ideal for lost or just for a refurbishment without spending too much.
The tension adjuster which is placed at the end of your tubes.
The ring which seals and tightens your intake pipes with your RIGID PHBG!
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
The only wealth screws for your PHBG!
The replacement cover single screw for your carburettors DELLORTO PHBG Racing Red and Black Edition.
The BS 2 version of DELLORTO PHBG Genuine high quality dellorto in Ø21mm.
Genuine high quality dellorto in Ø20mm.
The ultimate and ultra racing version of the 21 PHBG, of much better quality with parameters revised upwards, Red Edition model!
A real asset for a well-prepared engine configuration! A top-of-the-range piece 100% Made in Italy! CP EVOLUTION 21 model with lever choke, without separate lubrication or vacuum, flexible mounting ...
The rigid version and choke lever 21mm DELLORTO PHBG!
The rigid and cable choke version of the 21mm DELLORTO PHBG! Idle and richness screw on the left of the machine!
The rigid version and choke lever of the 21mm TUN'R PHBG! Idle and richness screw on the left of the machine!
A high-quality carburetor at a good price, with sockets for separate lubrication and depression! Choice of cable or lever!
It's a good copy sold complete and cheaper!
It is a good copy sold complete and cheaper!
Reference: 72 7114
PHBG 21 BD by malossi carburetor, a real performance piece.
The rigid and choke version with lever of the 21mm DELLORTO PHBG! Idle speed and richness screw on the left of the machine!
The real DELLORTO PHBG 21mm BT flexible, cable choke and possibility of separate lubrication! SPECIAL: Screw-on valve cover!
The real DELLORTO PHBG 21mm DS flexible, cable starter and possibility of separate lubrication!
As astonishing as its can be it is a very good carburetor with a top finish for a very affordable price.
Replacement carburettor TUN'R 'R type PHBG BT for your motorcycle, scooter ...