Reference: 53430.03
Pack joint for kit 80cc PARMAKIT Ø50mm on minarelli am6
Essential for the refurbishment of your high engine 80cc PARMAKIT 50mm diameter.
Banner
Here is one of the top kit the best performing market mover as the MHR, POLINI, BIDALOT for MINARELLI AM6, this small 80cc kit features a 50mm diameter, a single-piston segments end with side grease to minimize friction while providing maximum torque! The cylinder 5 transfer is treated aluminum nikasil of high quality. Its finish and architecture are excellent. A booster exhaust is also present for better evacuation of gas. A high compression cylinder head stud was chosen for this kit for better cooling and therefore better performance model with hemispherical chamber entering polished finish! You'll understand this kit highly efficient and powerful has high mode, all respecting the cubic capacity of 80cc original race 39mm therefore allowing you assembled your kit without having to cut your housings. Delivered 100% complete with its cylinder head, engine gaskets, pin, clips, segments purpose, piston ....
Optionally, we offer a preparation STAGE 1, this preparation includes a selection of the best part of our stock, a marked improvement in form and exhaust timing and a special touch to the skirt of the cylinder and piston for better scanning / filling according to our best essays. Improved lubrication and cooling bar (cross type) is made in passing to the plans obtained after preparation. This prep requires an additional period of 2 to 15 days depending on our availability! It requires tooling and around 4 to 5 hours of working on this cylinder. The price is accordingly.
contains:
Aluminum master cylinder with 5 transfers exhaust boost
-Culasse High compression aluminum stud
-piston Single segments with side grease
-1 End chrome Segment
Axis-piston of Ø12mm
Piston -Clips G
-pack Engine seals
-Notice
-Autocollant ...
Reference: 53430.03
Essential for the refurbishment of your high engine 80cc PARMAKIT 50mm diameter.
Reference: 133.1009
The famous 80 large cast iron POLINI kit for the am6 engine.
Reference: 11000062
A highly efficient and robust kit, the famous BIDALOT have nothing to prove!
Reference: 9919250
In the same type as the DR RACING, Powerful, solid, inexpensive, ideal to start a good little configuration on the am6 engine with the very famous black TOP PERFORMANCES .
Reference: CK.44.760.GR2
The direct competitor of MALOSSI MHR TEAM, the famous ITALKIT with cylinder 308-1 (exhaust with special boosters, specific skirt ...). Single-segment mounted, stud bolt!
Reference: 53440.00
The biggest market kit for MINARELLI AM6 engine !!! A big Ø55mm diameter, 39mm in race to pose with a home run! A true torque monster.
Reference: 075700
The ATHENA sport is certainly the best aluminum for a small budget, of very high quality, it is solid and very efficient! A perfect torque / power ratio.
Reference: 01135850
A large 50mm diameter aluminum at low prices! This AIRSAL 80cc offers a lot of torque to the minarelli am6 engine!
Reference: 3112386
The famous MHR TEAM 80cc for am6, standard race and original size transfers of course ... But what power! What a couple and what solidity !! One of the best normal races on the market!
Reference: 133.1008
One of the rare competitors at the height of the TEAM MHR, this POLINI EVOLUTION offers a lot of torque and power, to accompany a good configuration!
Reference: EQ-752
The famous 7 transfers cast iron Ø47mm 50cc motorcycle engine minarelli am6, comparable to FURYTECH but less torquey, powerful and stronger!
Reference: EQ-1033-S
The famous 50mm (80cc) aluminum BARIKIT BRK Racing with high compression cylinder head incoming combustion chamber! A very powerful cylinder with 5 transfers worked, big exhaust with bar, piston mono segment ....
Reference: 01134950
A large diameter 50mm aluminum at a low price! This AIRSAL luxury version 80cc offers a lot of torque to the engine minarelli am6, compared to the original version, it has a piston high-end segment!
Reference: P400130100005
A kit that allows you to have torque at all speeds.
Reference: CK.44.748.G1
GILARDONI cylinder 308 (oval exhaust) resistant aluminum with 6 transfers, VERTEX two segments piston, oval exhaust and improved cylinder head high compression mono block. A concentrate of performances.
Reference: 9919240
A high performance racing engine, solid and reliable for minarelli am6. Kit with one-piece cylinder head.
Reference: EQ-715
The famous 7 Ø47mm cast iron transfers with oval exhaust for minarelli am6 engine, Sport 1 version with single monoblock cylinder head in frustoconical shape, thicker segmentation ....