
Reference: 02 5038B
Straight pipe Ø15 or 19mm for MALOSSI valve box on MBK 51 / Peugeot 103
The best to repair or modify the size of your MALOSSI valve boxes on your PEUGEOT 103 or MBK 51.
Banner
MALOSSI angled aluminum intake pipe for flexible mounting, this model has an anti-slip lip for the flexible sleeve, we recommend it with a PHBG preferably Ø19 to 21mm. This is the pipe used in the MALOSSI 15 pack for MBK 51. It is blasted internally to prevent gas rebounds. It was designed for MBK 51 with original casings, MALOSSI valves will be very well suited with this intake pipe.
On the aesthetic side, malossi is indicated on the side, for its assembly provide a stud, one of the 4 holes is rather badly placed and prevents the passage of a screw and it is therefore necessary to use the stud / nut technique.
Reference: 02 5038B
The best to repair or modify the size of your MALOSSI valve boxes on your PEUGEOT 103 or MBK 51.
Reference: PIPE-POL-28-D
Pipe POLINI flexible 24-28mm for mopeds with crankcases POLINI!
Reference: 1314916B
Ø32mm spare sleeve angled at 90 ° internal for MALOSSI admission kit on VESPA 80, 125, 200 ...
Reference: 215.0245
High-end POLINI 15mm diameter valve box for MBK 51.
Reference: 516868
A perfect pipe to mount a carburettor in flexible assembly with a diameter of 17 to 21mm. It is very short and very well venturized to have a good power gain.
Reference: PIPE-POL-21-D
Pipe POLINI flexible 21mm for mopeds with crankcases POLINI!
Reference: PIPE-CRAZY-19
A very well designed intake pipe for your PHBG carburettor DELLORTO or POLINI CP!
Reference: 1415
A pipe with a correct finish that will go very well with a carburetor 14 to 16mm in SHA.
Reference: CAL01RRD
RRD PERFORMANCES wedge for re-orientation and adaptation of MINARELLI AM6 / DERBI valves / pipe on MOTOBECANE AV10 / MBK 51 engine with POLINI housings.
Reference: 02 6039B
A pipe created to match a 21 PHBG carburetor. This pipe is micro-blasted to prevent gas rebounds. Clearly it will mount a larger carburetor while gaining power.
Reference: pack_pipe_malossi_AM6_DERBI_90°
MALOSSI pipe for adaptation on PEUGEOT 103 / MBK 51 requiring an angled admission! Center distance am6 / DERBI
Reference: 317.0005
Set of 2 M6 studs that can be used for many applications.
Reference: PIPE-MAL-21
3D printed EPC pipe for housings MALOSSI on 103, EUROCILINDRO on MBK 51...
Reference: 215.0246
High-end 19mm diameter valve box POLINI for MBK 51.
Reference: 02 2962B
A fairly short pipe for maximum performance. It is mounted with a 15mm carburetor. In a very clear well studied and finished pipe for a good earning power of your engine.
Reference: 365952
A perfect pipe for mounting a carburetor in flexible mounting with a diameter of 17 to 21mm. It is very short and very well ventilated to have a good gain in power.