Reference: 247751
Valves DOPPLER ER2 for MBK 51 / MOTOBECANE AV10
A well worked room for a considerable performance boost on your MBK.
Banner
Ideal for mounting your flexible carburetors from 17 to 21mm, it is extremely short and well ventilated / studied. It has a machining (label type) to put a flexible sleeve, the latter is also delivered with this pipe, as well as the 2 clamps, you can install your carburettors from 17 to 21mm flexible mounting (fixing diameter on the sleeve from 21 to 25mm).
The DOPPLER logos are inscribed on each side of the pipe, remember that the flexible assemblies avoid the emulsion of gases, vibrations and jolts in the carburetor, these assemblies therefore improve performance!
The ideal tightened to mount it with MALOSSI VL2 valves and to align the pipe at the inlet of the valves, while breaking the inlet angles of the front valves. This pipe is delivered quite raw, to be reworked if possible! Ideal for preparers.
Reference: 247751
A well worked room for a considerable performance boost on your MBK.
Reference: 293370
A quality sleeve that absorbs vibrations very well for better gas flow.
Reference: 1408
At a good price and ideal to accompany a 14 to 16mm SHA carburetor on your MBK 51.
Reference: 317.0005
Set of 2 M6 studs that can be used for many applications.
Reference: 20 5123
Out of production.
Reference: pack_pipe_malossi_AM6_DERBI_90°
MALOSSI pipe for adaptation on PEUGEOT 103 / MBK 51 requiring an angled admission! Center distance am6 / DERBI
Reference: 8542
Pipe for 15 or 16mm SHA carburetor.
Reference: 215.0246
High-end 19mm diameter valve box POLINI for MBK 51.
Reference: 516868
A perfect pipe to mount a carburettor in flexible assembly with a diameter of 17 to 21mm. It is very short and very well venturized to have a good power gain.
Reference: 51305.05
For performance and strong motor! Accompanied with a rigid SHA carburetor 15 to 16mm.
Reference: 1314916B
Ø32mm spare sleeve angled at 90 ° internal for MALOSSI admission kit on VESPA 80, 125, 200 ...
Reference: 02 6572B
Pipe for flexible sleeve! A very good manufacturing quality.
Reference: 144.270.001
Flexible polini pipe 21mm for mini-moto and cross 2T POLINI, or mounting on POLINI crankcases with PEUGEOT 103 and MBK 51 supports!
Reference: 215.0242
Top model ideal for mounting a carburetor SHA 15 or 16mm on your MBK 51.
Reference: CAL01RRD
RRD PERFORMANCES wedge for re-orientation and adaptation of MINARELLI AM6 / DERBI valves / pipe on MOTOBECANE AV10 / MBK 51 engine with POLINI housings.
Reference: 1411
At a good price and ideal to accompany a 17.5 to 20 mm PHBG carburetor on your MBK 51.
Reference: 215.0350
Ideal in case of breakage, wear your old pipe ... special admission for casings POLINI engines.
Reference: 1414
A pipe created for 17 to 19mm carburetors in flexible or rigid PHBG. The finish is not great but it will still be a very good base.