Banner
44mm long stroke crankshaft for SACHS engine.
Very high quality RITO crankshaft for SACHS 50 engine. Long stroke 44mm, made of very high quality steel. Ultra reinforced connecting rod. Made in small custom series. Dynamic balancing, specifically designed for motors prepared with large kits. Solid masses for more pre-compression. Reinforced crankpin, re-studied scratching.
Crankshaft for SACHS long stroke 44mm :
17mm bristles (bearing surfaces)
Crank pin offset at 22mm (stroke 44mm)
Connecting rod length: 85mm
Ignition arm: 71.9mm
Other arm: 92.6mm
Reference: 6001012
Rod reinforced in 85mm, crank pin Ø16mm for MINARELLI RV3, P4R, P4, RV4.
Reference: 9.117.25.1.114
Rod reinforced in 85mm, crank pin Ø16mm for MINARELLI P5R.
Reference: BC.1522
Rod reinforced in 85mm, crank pin Ø16mm for MINARELLI P6, P6R and RV6.
Reference: 9.117.88.1.015
44mm long stroke crankshaft for MINARELLI K6 50 engine
Reference: 6030071
Here is the Crankshaft of original type Top Racing for Zundapp 3 & 4 Speed C 50 GTS CS CX ZD ZL NEU ....
Reference: 9.149.23.1.012
Long stroke crankshaft 42mm for 3 speed SACHS engine by hand.
Reference: 09.149.41.1.012
48mm long stroke crankshaft for SACHS 80 2T engine.
Reference: 6030016
Crankshaft type original quality for MINARELLI P6 and P4 has 4 speeds.
Reference: 9.117.89.1.015
A very high quality 42mm stroke crankshaft for your MINARELLI P6R.
Reference: 9.117.25.1.115
Rod reinforced in 85mm, crank pin Ø16mm for MINARELLI P6, P6R and RV6.
Reference: 9.096.22.1.013
Crankshaft for KREIDLER, FLORETT ...
Reference: 9.096.24.1.015
Original 39.7mm stroke crankshaft for KREIDLER, FLORETT ...
Reference: 9.149.29.1.012
Long stroke crankshaft 44mm for 3 speed SACHS engine by hand.
Reference: 53488.14
A crankshaft of very high quality cortex 44mm for your MINARELLI P6.
Reference: 9.149.15.1.012
40mm stroke crankshaft for SACHS engine.
Reference: 6030038
Crankshaft for old engines CASAL has 2 speeds 50 2T.
44mm long stroke crankshaft for SACHS engine.
