Reference: 9.117.86.1.015
Crankshaft, connecting rod assembly RITO original race 39,1mm for MINARELLI P6 engine
Original 39.1mm stroke crankshaft for MINARELLI P6 engine.
Banner
Very high quality RITO crankshaft for KREIDLER engine. Long stroke 42mm, made of very high-end steel. Ultra reinforced connecting rod. Made in small custom series. Dynamic balancing, specifically designed for motors prepared with large kits. Solid masses for more pre-compression. Reinforced crankpin, re-studied scratching.
Also exists in 44mm stroke and 48mm stroke.
Crankshaft for KREIDLER stroke 42mm :
17mm bristles (bearing surfaces)
Crank pin offset at 21mm (stroke 42mm)
Connecting rod length: 85mm
Mass thickness: 39.8mm
Ignition arm: 64.35mm
Other arm: 63.8mm
Reference: 9.117.86.1.015
Original 39.1mm stroke crankshaft for MINARELLI P6 engine.
Reference: 53488.14
A crankshaft of very high quality cortex 44mm for your MINARELLI P6.
Reference: 9.149.15.1.012
40mm stroke crankshaft for SACHS engine.
Reference: 9.149.23.1.012
Long stroke crankshaft 42mm for 3 speed SACHS engine by hand.
Reference: 09.117.90.1.015
A very high quality crankshaft in 44mm stroke for your MINARELLI P6R.
Reference: 6030071
Here is the Crankshaft of original type Top Racing for Zundapp 3 & 4 Speed C 50 GTS CS CX ZD ZL NEU ....
Reference: 9.149.29.1.012
Long stroke crankshaft 44mm for 3 speed SACHS engine by hand.
Reference: 6030016
Crankshaft type original quality for MINARELLI P6 and P4 has 4 speeds.
Reference: 9.096.23.1.013
Crankshaft for KREIDLER, FLORETT ...
Reference: AMT 032A
High quality crankshaft, special 42mm long stroke model with 85mm connecting rod.
Reference: 9.033.21.1.015
44mm long stroke crankshaft for CASAL engine with 6 speed ratios.
Reference: 6030039
Crankshaft for old engines CASAL has 4 and 5 speeds 50 2T.
Reference: 9.149.19.1.012
42mm long stroke crankshaft for 2 speed SACHS engine.
Reference: 9.117.25.1.115
Rod reinforced in 85mm, crank pin Ø16mm for MINARELLI P6, P6R and RV6.
Reference: 9.149.21.1.012
Long stroke crankshaft 42mm for SACHS engine with 3 speeds at feet.
Reference: 9.117.25.1.111
Rod reinforced 85mm, crank pin Ø16mm for MINARELLI P4R, P4, RV4.