Banner
Long stroke crankshaft 44mm for 3 speed SACHS engine by hand.
Very high quality RITO crankshaft for SACHS 50 engine with 3 speeds, gear change by hand. Long stroke 44mm, made of very high-end steel. Ultra reinforced connecting rod. Made in small custom series. Dynamic balancing, specifically designed for motors prepared with large kits. Solid masses for more pre-compression. Reinforced crankpin, re-studied scratching.
Crankshaft for SACHS 3 SPEED passage by hand long stroke 44mm :
17mm and 17mm bristles (bearing surfaces)
Crank pin offset at 22mm (stroke 44mm)
Connecting rod length: 85mm
Ignition arm: 71mm
Other arm: 71,5mm
Reference: 9.117.25.1.114
Rod reinforced in 85mm, crank pin Ø16mm for MINARELLI P5R.
Reference: 9.149.23.1.012
Long stroke crankshaft 42mm for 3 speed SACHS engine by hand.
Reference: 9.033.21.1.015
44mm long stroke crankshaft for CASAL engine with 6 speed ratios.
Reference: 9.117.89.1.015
A very high quality 42mm stroke crankshaft for your MINARELLI P6R.
Reference: 9.149.15.1.012
40mm stroke crankshaft for SACHS engine.
Reference: 9.149.09.1.012
39.7mm original stroke crankshaft for SACHS engine.
Reference: 9.149.19.1.012
42mm long stroke crankshaft for 2 speed SACHS engine.
Reference: 9.117.88.1.015
44mm long stroke crankshaft for MINARELLI K6 50 engine
Reference: BC.1522
Rod reinforced in 85mm, crank pin Ø16mm for MINARELLI P6, P6R and RV6.
Reference: 9.096.23.1.013
Crankshaft for KREIDLER, FLORETT ...
Reference: 9.149.25.1.012
44mm long stroke crankshaft for SACHS engine.
Reference: AMT 032A
High quality crankshaft, special 42mm long stroke model with 85mm connecting rod.
Reference: AMT 152A
An unusual crankshaft in a 44m race for your MINARELLI P4, P6 ... engine.
Reference: 9.096.22.1.013
Crankshaft for KREIDLER, FLORETT ...
Reference: 9.096.24.1.015
Original 39.7mm stroke crankshaft for KREIDLER, FLORETT ...
Reference: 6030039
Crankshaft for old engines CASAL has 4 and 5 speeds 50 2T.
Long stroke crankshaft 44mm for 3 speed SACHS engine by hand.
