Reference: 53488.14
Crankshaft, connecting rod assembly PARMAKIT long race 44mm (Ø17mm bristles) for mécaboite driving minarelli P6
A crankshaft of very high quality cortex 44mm for your MINARELLI P6.
Banner
Very high quality RITO crankshaft for MINARELLI P6 engine. Original stroke 39.1mm, made of very high-end steel. Ultra reinforced connecting rod. Made in small custom series. Dynamic balancing, specifically designed for engines prepared with large kits but also mounts very well on original engines or in 50cc kit. Solid masses for more pre-compression. Reinforced crankpin, re-studied scratching.
Also exists in long race.
Crankshaft for MINARELLI P6 original race 39,1mm :
17mm bristles (bearing surfaces)
Crank pin offset at 19.55mm (stroke 39.1mm)
Connecting rod length: 85mm
Ignition arm: 71.6mm
Other arm: 77.3mm
Reference: 53488.14
A crankshaft of very high quality cortex 44mm for your MINARELLI P6.
Reference: 9.149.25.1.012
44mm long stroke crankshaft for SACHS engine.
Reference: 9.149.29.1.012
Long stroke crankshaft 44mm for 3 speed SACHS engine by hand.
Reference: 6030038
Crankshaft for old engines CASAL has 2 speeds 50 2T.
Reference: AMT 152A
An unusual crankshaft in a 44m race for your MINARELLI P4, P6 ... engine.
Reference: 6001012
Rod reinforced in 85mm, crank pin Ø16mm for MINARELLI RV3, P4R, P4, RV4.
Reference: AMT 032A
High quality crankshaft, special 42mm long stroke model with 85mm connecting rod.
Reference: 9.149.19.1.012
42mm long stroke crankshaft for 2 speed SACHS engine.
Reference: BC.1530
Rod reinforced 85mm, crank pin Ø16mm for MINARELLI P4R, P4, RV4.
Reference: 9.117.25.1.114
Rod reinforced in 85mm, crank pin Ø16mm for MINARELLI P5R.
Reference: 6030039
Crankshaft for old engines CASAL has 4 and 5 speeds 50 2T.
Reference: 9.033.21.1.015
44mm long stroke crankshaft for CASAL engine with 6 speed ratios.
Reference: 9.096.24.1.015
Original 39.7mm stroke crankshaft for KREIDLER, FLORETT ...
Reference: 9.096.23.1.013
Crankshaft for KREIDLER, FLORETT ...
Reference: 9.096.21.1.013
Crankshaft for KREIDLER, FLORETT ...
Reference: BC.1522
Rod reinforced in 85mm, crank pin Ø16mm for MINARELLI P6, P6R and RV6.