Banner
44mm long stroke crankshaft for MINARELLI K6 50 engine
Very high quality RITO crankshaft for MINARELLI K6 50 engine. Long stroke 44mm, made of very high quality steel. Ultra reinforced connecting rod. Made in small custom series. Dynamic balancing, specifically designed for motors prepared with large kits. Solid masses for more pre-compression. Reinforced crankpin, re-studied scratching.
Crankshaft for MINARELLI K6 long race 44mm :
20mm bristles (bearing surfaces)
Crank pin offset at 22mm (stroke 44mm)
Connecting rod length: 90mm
Mass thickness: 44mm
Ignition arm: 69.3mm
Other arm: 73.5mm
Reference: 6030016
Crankshaft type original quality for MINARELLI P6 and P4 has 4 speeds.
Reference: 6001012
Rod reinforced in 85mm, crank pin Ø16mm for MINARELLI RV3, P4R, P4, RV4.
Reference: BC.1530
Rod reinforced 85mm, crank pin Ø16mm for MINARELLI P4R, P4, RV4.
Reference: 09.117.85.1.015
Original 39.1mm stroke crankshaft for MINARELLI CORSA CORTA engine.
Reference: 53488.14
A crankshaft of very high quality cortex 44mm for your MINARELLI P6.
Reference: 9.149.23.1.012
Long stroke crankshaft 42mm for 3 speed SACHS engine by hand.
Reference: 9.117.25.1.111
Rod reinforced 85mm, crank pin Ø16mm for MINARELLI P4R, P4, RV4.
Reference: 9.149.25.1.012
44mm long stroke crankshaft for SACHS engine.
Reference: 9.096.23.1.013
Crankshaft for KREIDLER, FLORETT ...
Reference: 9.149.15.1.012
40mm stroke crankshaft for SACHS engine.
Reference: 9.096.21.1.013
Crankshaft for KREIDLER, FLORETT ...
Reference: 9.117.25.1.115
Rod reinforced in 85mm, crank pin Ø16mm for MINARELLI P6, P6R and RV6.
Reference: 9.117.87.1.015
44mm long stroke crankshaft for MINARELLI MR6 50 engine
Reference: 09.117.90.1.015
A very high quality crankshaft in 44mm stroke for your MINARELLI P6R.
Reference: 9.149.19.1.012
42mm long stroke crankshaft for 2 speed SACHS engine.
Reference: AMT 152A
An unusual crankshaft in a 44m race for your MINARELLI P4, P6 ... engine.
44mm long stroke crankshaft for MINARELLI K6 50 engine
