Banner
Original 39.7mm stroke crankshaft for KREIDLER, FLORETT ...
Very high quality RITO crankshaft for KREIDLER engine. Original 39.7mm stroke, made of very high-end steel. Ultra reinforced connecting rod. Made in small custom series. Dynamic balancing, specifically designed for engines prepared with large kits but also mounts very well on original engines or in 50cc kit. Solid masses for more pre-compression. Reinforced crankpin, re-studied scratching.
Also exists in long stroke 42, 44 and 48mm.
Crankshaft for KREIDLER original race 39,7mm :
17mm bristles (bearing surfaces)
Crank pin offset at 19.85mm (stroke 39.7mm)
Connecting rod length: 85mm
Mass thickness: 39.8mm
Ignition arm: 64.35mm
Other arm: 63.8mm
Reference: 9.149.29.1.012
Long stroke crankshaft 44mm for 3 speed SACHS engine by hand.
Reference: 9.149.23.1.012
Long stroke crankshaft 42mm for 3 speed SACHS engine by hand.
Reference: 9.149.25.1.012
44mm long stroke crankshaft for SACHS engine.
Reference: 9.149.21.1.012
Long stroke crankshaft 42mm for SACHS engine with 3 speeds at feet.
Reference: 09.117.90.1.015
A very high quality crankshaft in 44mm stroke for your MINARELLI P6R.
Reference: 9.117.87.1.015
44mm long stroke crankshaft for MINARELLI MR6 50 engine
Reference: 53480.14
A very high quality crankshaft in coruse 42mm for your MINARELLI P6.
Reference: 6030038
Crankshaft for old engines CASAL has 2 speeds 50 2T.
Reference: 6001013
Connecting rod reinforced in 85mm, pin Ø16mm for MINARELLI P6, P6R and RV6.
Reference: 9.149.15.1.012
40mm stroke crankshaft for SACHS engine.
Reference: 6030039
Crankshaft for old engines CASAL has 4 and 5 speeds 50 2T.
Reference: 53488.14
A crankshaft of very high quality cortex 44mm for your MINARELLI P6.
Reference: BC.1530
Rod reinforced 85mm, crank pin Ø16mm for MINARELLI P4R, P4, RV4.
Reference: 09.117.85.1.015
Original 39.1mm stroke crankshaft for MINARELLI CORSA CORTA engine.
Reference: 9.149.19.1.012
42mm long stroke crankshaft for 2 speed SACHS engine.
Reference: 9.096.22.1.013
Crankshaft for KREIDLER, FLORETT ...
Original 39.7mm stroke crankshaft for KREIDLER, FLORETT ...
