Reference: 08127_00
DELLORTO clamp screw for DELLORTO PHBG carburettor
Spare screw for clamp on DELLORTO PHBG carburettors all models.
Price
€1.66
Shipping in 1-3 days
Shipping in 1-3 days
- There are no more items in your cart
- Shipping Free
- Total €0.00
-
Banner
Reference: 1263
DELLORTO universal single cable tensioner screw for accelerator / choke
The tension adjuster which is placed at the end of your tubes.
Price
€3.33
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 40078900
Extra-flat valve cover on DELLORTO PHBG carburettor with screw-on cover (since 2020)
Extra-flat valve cover for Dellorto PHBG carburettor.
Price
€32.49
Attention, may require a delay of more than 20 days
Attention, may require a delay of more than 20 days
Reference: 09506
Float shaft for DELLORTO PHBG carburettors
Bar, axle, float holding rod for DELLORTO carb.
Price
€1.66
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 09538_00
Full lever choke lever for carburettor PHBG DELLORTO
Ideal to pass your choke cable pull or to repair your PHBG!
Price
€12.49
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 1285
Gasket for carburettor DELLORTO PHBG
Ideal in case of leakage for a good quality repair at low price.
Price
€1.66
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 129514
Gasket for valve cover for carburettor DELLORTO PHBG
For a refurbishment at a lower cost for a perfect seal.
Price
€1.66
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 26 4189
Kit tube 40mm bent 90 ° for carburettor MALOSSI
Ideal for lost or modify the passage of your cable.
Price
€13.33
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 121692
Locking nut (against nut) for DELLORTO cable tensioning screw
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Price
€1.66
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 09812
Machined brass tank cap for DELLORTO PHBG carburettors
A mass-machined brass cap for your carburetors with aluminum tank or racing black edition!
In stock
Reference: 25 6408
MALOSSI extra-flat bush lid on carburettor DELLORTO PHBG
Malossi extra-flat bush lid for Dellorto PHBG carburetor.
Price
€7.49
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 02838_00
Needle for carburettor DELLORTO PHBG, PHBG Racing, SHA
Ideal in case of problem, breakage or loss of your old part!
Price
€4.16
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 213458
O-ring screw richness DELLORTO carburettor PHBG, PHBE, PHBH, PHBL, VHST ...
A necessary part for the proper functioning of your carburetor.
Price
€1.66
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 2707
only idle screw for carburettor DELLORTO PHBG
The idle screw without its spring for your PHBG!
Price
€4.99
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 09444_00
Plastic bowl for DELLORTO PHBG and PHBD carburettors
The replacement tank at low prices for your DELLORTO carburettors.
Price
€4.16
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 14958_00
Plastic bushel spring sleeve for DELLORTO PHBG and PHVB carburettor
Ideal in case of loss or breakage of your old support, bushel socket.
Price
€1.66
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 4477.62
Reduction ring Ø24mm for DELLORTO PHBG carburettor
The ring which seals and tightens your intake pipes with your RIGID PHBG!
Price
€1.66
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 18951-53
Screw-in valve cover for PHBG carburettor new models
The replacement cover for your DELLORTO PHBG carburettors, to screw.
Price
€8.33
At your place in 2 to 5 days
At your place in 2 to 5 days
Reference: 01476_00
sheath cap only universal DELLORTO
The original cap of all DELLORTO carburetor. Perfect for any loss or breakage of your old cap.
Price
€2.49
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 1282
Spring idle screw on carburettor DELLORTO PHBG, PHBE, PHBH, PHBL ...
Ideal for lost or just for a refurbishment without spending too much.
Price
€1.66
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 09779_00
Tank bottom cup on carburettor DELLORTO PHBG and others (small principal jet) not deep model
Essential part of your carburettor PHBG for better mixing oil / petrol! Not deep model for jet small step 5mm.
Price
€1.66
Shipping in 1-3 days
Shipping in 1-3 days