
Reference: 2379.02.3356
Trimmer / cable adjuster barrel thread Ø8mm / sheath tip for Ø8mm to bike and other (free brake nut)
Competition piece machined in the mass Ø8mm threading for sheath tip Ø8mm.
Reference: 2379.02.3356
Competition piece machined in the mass Ø8mm threading for sheath tip Ø8mm.
Reference: 01486_72
Certified DELLORTO INC! Choose real DELLORTO quality!
Reference: 320765
Ideal in case of breakage, loss or simply wear and tear on your necklace.
Reference: 06 3140
Perfect for settling your squish.
Reference: 6561
A good quality sheath that will allow you to match it to your machine.
Banner
Complete pipe kit, length 40mm thread off, 90 ° angle. Cable accelerator or choke on carburettor DELLORTO SHA. Mountable on all models DELLORTO standard threading! Delivered as presented with 2 against stop nut, tube, 2 rubbers, 2 threaded tube length adjustment.
Reference: 09506
Bar, axle, float holding rod for DELLORTO carb.
Reference: 45644
A tulip that increases the venturi effect therefore the performance of your engine.
Reference: 285037
The idle screw without its spring for your PHBG!
Reference: 16962_00
The replacement cover single screw for your carburettors DELLORTO PHBG Racing Red and Black Edition.
Reference: 1298
The little room in which hangs the starter cable.
Reference: 53027_00
The idle screw with its spring for your PHBG carburettors!
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.
Reference: S5809
Excellent in the event of a problem or a leak in your carburetor.
Reference: 14958_00
Ideal in case of loss or breakage of your old support, bushel socket.
Reference: 343.0021
Ideal in case of loss or to pass your cable as desired.
Reference: 30 3338
Ideal for permanent control of your fuel and your settings with ease.
Reference: 121692
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Reference: 09597_00
The valve spring for your carbs, ideal when the handle returns badly or in the event of loss, wear, breakage...
Reference: 1263
The tension adjuster which is placed at the end of your tubes.
Reference: 10 5397B
Ideal in case of wear, breakage ... of your old MALOSSI tank cap.
Reference: 53002
A pack to switch your PHBG carburettors choke lever to cable choke!
Ideal for lost or modify the passage of your cable.