Banner
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Special nut Ø4mm special fine thread for cable tension adjustment screw on DELLORTO carburettors.
Reference: 1263
The tension adjuster which is placed at the end of your tubes.
Reference: 09444_00
The replacement tank at low prices for your DELLORTO carburettors.
Reference: 4477.62
The ring which seals and tightens your intake pipes with your RIGID PHBG!
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.
Reference: 4224-82
A tulip which increases the venturi effect therefore the efficiency of your engine.
Reference: 26 4189
Ideal for lost or modify the passage of your cable.
Reference: 16962_00
The replacement cover single screw for your carburettors DELLORTO PHBG Racing Red and Black Edition.
Reference: 1280
Ideal for refurbishment or for loss.
Reference: 1285
Ideal in case of leakage for a good quality repair at low price.
Reference: 203.1504
A machined / blue anodized part POLINI for your PHBG carburettors!
Reference: 09506
Bar, axle, float holding rod for DELLORTO carb.
Reference: 45644
A tulip that increases the venturi effect therefore the performance of your engine.
Reference: 10 5397B
Ideal in case of wear, breakage ... of your old MALOSSI tank cap.
Reference: 09450
The replacement float for your carbs, ideal in the event of a fuel leak!
Reference: 1282
Ideal for lost or just for a refurbishment without spending too much.
Reference: 05 3733B
Ideal to increase the venturi effect so your performance.
Reference: 129517
The only wealth screws for your PHBG!
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
