
Reference: 263991
80mm 160 ° angled tube kit for DELLORTO carburettor
A complete kit that will allow you to pass your cables as you wish.
Banner
If you want to embellish your PHBG with a racing touch while making the jet settings more practical (you just have to remove the cap and tilt the carburetor to change the jet .. Without removing the tank). Here is the machined brass tank cap from Dellorto is reserved for Dellorto PHBG carburettors equipped with aluminum tank. The tank is also on sale here, the cap gasket not being separately, you will have to buy the complete PHBG gasket pack also on sale here.
Reference: 263991
A complete kit that will allow you to pass your cables as you wish.
Reference: 53036_00
Ideal in case of loss or change the passage of your cable.
Reference: 53129_00
Ideal in case of loss or to pass your cable as desired.
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.
Reference: 09814_00
A tulip which increases the venturi effect and therefore the efficiency of your engine. In addition to this, you need to know more about it.
Reference: 53031.78
The spare cover with screws for your DELLORTO PHBG carburettors except Racing Red and Black Edition.
Reference: 53027_00
The idle screw with its spring for your PHBG carburettors!
Reference: 09779_00
Essential part of your carburettor PHBG for better mixing oil / petrol! Not deep model for jet small step 5mm.
Reference: 10431
The bowl bottom also called anti-emulsion washer ... Indispensable for the proper functioning of your carburetor and oil / gasoline mixing!
Reference: 121692
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Reference: 11540
Excellent in the event of a problem or a leak in your carburetor.
Reference: 09450
The replacement float for your carbs, ideal in the event of a fuel leak!
Reference: 30 3339
A quality transparent tank with plug for PHBG and PHBD carburettor.
Reference: 2707
The idle screw without its spring for your PHBG!
Reference: 473464
A very aesthetic tank delivered with its seal and screws for a very good price!
Reference: 343.0021
Ideal in case of loss or to pass your cable as desired.
A mass-machined brass cap for your carburetors with aluminum tank or racing black edition!